Design of the structural arrangement for a space reflector via parametric and topology optimization

• Main Authors: Elena K. Filina, Evgenii S. Golubev, Konstantin V. Mikhailovskiy, Mikhail Yu. Arkhipov
• Format: Article
• Language: English
• Published: Peoples’ Friendship University of Russia (RUDN University) 2019-12-01
• Series: RUDN Journal of Engineering Researches
• Subjects: space antenna; reflector; structural arran- gement; ribs; carbon fiber reinforced plastic; parametric optimization; topology optimization; static analysis; thermal deformations
• Online Access: http://journals.rudn.ru/engineering-researches/article/viewFile/23420/18091

Development of the optimal structural arrangement for a reflector with the aim to improve its mass and design is of importance due to the necessity to increase areal density and decrease rigidity of the modern space antennas vehicles. Currently, CAE-systems allow to design reflectors using both traditional methods, for example, parametric optimization, and methods which are innovative in this field, such as topology optimization. The paper compares two methods of the structural arrangement design for a thin dimensionally stable reflector operating as part of a geostationary spacecraft: parametric and topology optimization. The algorithms of the structural arrangement development which include the statement of the optimization problem, geometry design and a number of check analyses are presented. A number of structural of a space reflector design under the action of loads at the stage of launch, temperature gradients at the exploitation conditions and modal analysis is performed. The designed reflectors are compared. The studies performed allowed us to develop the optimal structural arrangement for a space reflector using the parametric and topology optimization. The optimal structural arrangement for a space reflector using the optimization could be produced surface figure error (estimated in RMS) with respect to the theoretical paraboloid.