Friction Characteristics of Machined Metal with Different Surface Morphologies

Friction Characteristics of Machined Metal with Different Surface Morphologies

This study examined the friction characteristics of SAE1045 medium carbon steel processed by milling machining (MM) and abrasive jet machining (AJM). Friction experiments were conducted with variations in load and friction distance. Experimental results show that micro craters produced by AJM help r...

Full description

Bibliographic Details
Main Authors:	Hsin-Min Lee, A-Cheng Wang, Yan-Cherng Lin
Format:	Article
Language:	English
Published:	Hindawi Limited 2015-01-01
Series:	Advances in Materials Science and Engineering
Online Access:	http://dx.doi.org/10.1155/2015/710768

Similar Items

Study of Friction Characteristic on Shape of Metal Machining Surface
by: Kuo-Hsia Ling, et al.
Published: (2009)

Evaluation of Frictional Characteristics of Precision Machined Surfaces
by: Kalil, Richard Charles, Jr.
Published: (2005)

Wear Morphology on the Surfaces of CoCrMo Unicompartmental Knee Joint Endoprostheses as Elements of Metal–Metal Friction Nodes
by: Arkadiusz Szarek, et al.
Published: (2020-06-01)

Analysis of Friction Characteristics for Sliders with Machined Texture
by: Pin-Lun Huang, et al.
Published: (2016)

CORROSION AND SURFACE PROTECTION IN MACHINE MATERIALS FRICTION HAVE DIFFERENT SURFACE PAIRS EXPERIMENTAL INVESTIGATION OF FACTORS
by: Senai YALCINKAYA
Published: (2017-05-01)

Effect of Surface Micro-Hardness Change in Multistep Machining on Friction and Wear Characteristics of Titanium Alloy
by: Guanming Hou, et al.
Published: (2021-08-01)

Surface Modifications and Finish Effects on Electrical Discharge Machining Surfaces
by: Yan-Cherng Lin, et al.
Published: (2001)

Influence of Active Elements of a Machining Medium on Electronic Structure and the Mechanism of Deformation of Surface Layers of Metal at Friction
by: V. V. Tykhonovych, V. M. Uvarov
Published: (2011-06-01)

Effects of The Characteristics of The Metal Pairs on Adhesion During Friction Process
by: WANG,PING-CHUAN, et al.
Published: (2018)

Studies on Automatic Feed and Grinding Characteristics of Friction Drive-Type Superfinishing Machine
by: Yan, Chen-Yu, et al.
Published: (1997)

Reduction of Friction of Metals Using Laser-Induced Periodic Surface Nanostructures
by: Zhuo Wang, et al.
Published: (2015-10-01)

Heat transfer and flow friction characteristics of fibrous metals.
by: Funke, Richard Harrison.
Published: (2012)

Investigation of reciprocating friction characteristics between different bionic surfaces of prosthesis materials and skin
by: Quanping Feng, et al.
Published: (2019-05-01)

Study on Friction and Lubrication Characteristics of Surface with Unidirectional Convergence Texture
by: Chenchen Li, et al.
Published: (2019-11-01)

Tribological properties of surface microtexture friction pairs under different lubrication conditions
by: Lili Wang, et al.
Published: (2019-10-01)

Wear Characteristics of Different Groove-Shaped Friction Pairs of a Friction Clutch
by: Heyun Bao, et al.
Published: (2021-12-01)

Theoretical Analysis of Frictional Temperature between Dissimilar Metal Surfaces
by: Chang-hao Lu, et al.
Published: (2005)

Variation of the friction characteristics of road surfacing materials with time
by: Friel, Shaun
Published: (2013)

A Study on the Frictional Characteristics of Sliding Surface Texture
by: Jeng-Da Chen, et al.
Published: (2011)

Fractal calculation method of friction parameters: Surface morphology and load of galvanized sheet
by: Yang Xiaoyong, et al.
Published: (2021-07-01)

Effects of select fluids on the friction of metal-on-polyethylene joint replacement surfaces
by: Chang, Timothy C. (Timothy Chan), 1979-
Published: (2006)

Investigation of friction and wear properties of PE sliding against metal surface
by: Shi, Dian Ming, et al.
Published: (1996)

A study of wear, friction and deformation in the abrasion of metal and other surfaces
by: Avient, Brian William Edward
Published: (1962)

The surface deformation, friction and wear of some non-metals during abrasion
by: Dobson, Peter Scarber
Published: (1962)

Friction, wear and tangential stiffness of metal surfaces under fretting conditions
by: Proprentner, Daniela
Published: (2012)

The Research on Friction Characteristics of Non Smooth Bionic Mesoscopic Surface
by: Su Chunjian, et al.
Published: (2014-12-01)

Probing of Nanoscale Friction and Mechanical Characteristics of Cotton Fiber’s Surface
by: Farzad Hosseinali, et al.
Published: (2019-07-01)

Friction characteristic study on flat surface embedded with micro pit
by: Y., Aiman, et al.
Published: (2021)

Friction sawing of metals
by: Ogunlade, Omojola
Published: (2011)

Friction Characteristics of Surface after The Lateral Load Applied on The Pile
by: Ya-Hui Tsai, et al.
Published: (2004)

Internal Friction in Metals
by: Alford, Jack Leland
Published: (1950)

Internal Friction in Metals
by: Hudson, Donald Ellis
Published: (1942)

Cupronickel B10 and YG6 interface friction characteristics tested on a friction device for metal cutting
by: Chunjian Liu, et al.
Published: (2019-11-01)

Influences of metal-metal friction characteristics on the performance of metal V-belt type continuously variable transmission
by: Narita, Keiichi
Published: (2007)

The friction and wear characteristics of a sintered metal motorcycle friction braking material, under wet and dry conditions
by: Flitcroft, S. M.
Published: (1990)

Investigation on the Friction Characteristics of a Feeding System with Mixed-Texture Sliding Surfaces
by: Ming-Shen Lin, et al.
Published: (2013)

Machine Learning Algorithm for Surface Quality Analysis of Friction Stir Welded Joint
by: Mishra Akshansh
Published: (2020-11-01)

Modeling and Simulation Based on Morphology of Machined Surface in High-speed Milling
by: Songtao Wang, et al.
Published: (2014-08-01)

Skin Friction Reduction Characteristics of Nonsmooth Surfaces Inspired by the Shapes of Barchan Dunes
by: Xiao-wen Song, et al.
Published: (2017-01-01)

Study of Machines for Micro Friction Stir Welding
by: Shao-Wei Cheng, et al.
Published: (2013)