Statistical Analysis of Polymer Nanocomposites for Mechanical Properties

Statistical Analysis of Polymer Nanocomposites for Mechanical Properties

Epoxy resins, due to their high stiffness, ease of processing, good heat, and chemical resistance obtained from cross-linked structures, have found applications in electronics, adhesives coatings, industrial tooling, and aeronautic and automotive industries. These resins are inherently brittle, whic...

Full description

Bibliographic Details
Main Authors:	Shankar A. Hallad, N. R. Banapurmath, T. M. Yunus Khan, M. A. Umarfarooq, Manzoore Elahi M. Soudagar, Anand M. Hunashyal, Sandeep V. Gujjar, Jayachandra S. Yaradoddi, Sharanabasava V. Ganachari, Ashraf Elfasakhany, Md Irfanul Haque Siddiqui, Masood Ashraf Ali
Format:	Article
Language:	English
Published:	MDPI AG 2021-07-01
Series:	Molecules
Subjects:	multi-walled carbon nanotube epoxy nanocomposites flexural test scanning electron microscopy energy-dispersive X-ray spectroscopy
Online Access:	https://www.mdpi.com/1420-3049/26/14/4135

Similar Items

Biodegradable carboxymethyl cellulose based material for sustainable packaging application
by: Jayachandra S. Yaradoddi, et al.
Published: (2020-12-01)

RETROFITTING OF REINFORCED CONCRETE BEAMS USING FIBRE REINFORCED POLYMER (FRP) COMPOSITES – A REVIEW
by: Namasivayam Aravind, et al.
Published: (2013-06-01)

Effect of Parameters Behavior of Simarouba Methyl Ester Operated Diesel Engine
by: Keerthi Kumar N., et al.
Published: (2021-08-01)

Investigation of flexural and creep behavior of epoxy-based nano-sized CaTiO3 particles
by: Sarkawt Rostam, et al.
Published: (2021-03-01)

Influence of Graphene Nano Particles and Antioxidants with Waste Cooking Oil Biodiesel and Diesel Blends on Engine Performance and Emissions
by: Sandeep Krishnakumar, et al.
Published: (2021-07-01)

Study of Durability of Epoxy Bonded Joints in Aqueous Environments
by: Lian, Michelle K.
Published: (2014)

Leverage of Environmental Pollutant Crump Rubber on the Dry Sliding Wear Response of Epoxy Composites
by: Kiran Shahapurkar, et al.
Published: (2021-08-01)

Mechanical and Thermal Properties of Epoxy Composites Containing Zirconium Oxide Impregnated Halloysite Nanotubes
by: Moon il Kim, et al.
Published: (2017-12-01)

The Effects of Nanosilica on Mechanical Properties and Fracture Toughness of Geopolymer Cement
by: Cut Rahmawati, et al.
Published: (2021-06-01)

Flexural strength of hybrid composite resin epoxy reinforced stinging nettle fiber with silane chemical treatment
by: Iketut Suarsana, et al.
Published: (2021-03-01)

Investigation of the Influence of the Synthesized Iron-Carbide Mixture on the Adhesive and Mechanical Properties of Epoxy Composites for Parts of Transport Machines
by: A. Buketov, et al.
Published: (2020-08-01)

Pengujian Kapasitas Lentur dan Kapasitas Tumpu Konstruksi Dinding Alternatif Berbahan Dasar Epoxy Polystyrene (EPS)
by: Agus Setiawan
Published: (2010-12-01)

THE MECHANICAL BEHAVIOR OF POLYMER COMPOSITES REINFORCED BY NATURAL MATERIALS
by: Rusul S. Hadi, et al.
Published: (2021-03-01)

Assessing the Flexural Properties of Epoxy Composites with Extremely Low Addition of Cellulose Nanofiber Content
by: Yingmei Xie, et al.
Published: (2020-02-01)

TENSILE STRENGTH STUDY ON REINFORCED BEAMS
by: Catalina IANASI
Published: (2016-05-01)

Microcapsules Filled with a Palm Oil-Based Alkyd as Healing Agent for Epoxy Matrix
by: Nurshafiza Shahabudin, et al.
Published: (2016-04-01)

Mechanical Properties and Characterization of Epoxy Composites Containing Highly Entangled As-Received and Acid Treated Carbon Nanotubes
by: Aaron S. Krieg, et al.
Published: (2021-09-01)

Studi sifat mekanis komposit epoxy berpenguat serat sisal orientasi acak yang dicetak dengan teknik hand-lay up
by: I Wayan Surata, et al.
Published: (2017-03-01)

Dynamic Modulus of Wood Containing Water-Resistant Glue Finger Joint after Severe Steaming
by: Shamin Shamaiirani, et al.
Published: (2016-09-01)

Investigation of the Mechanical Properties of Bagasse Fiber-Reinforced Epoxy Composite using Taguchi and Response Surface Methodology
by: Karuppusamy Kanthavel, et al.
Published: (2015-05-01)

Influences of Aluminium / E-Glass Volume Fraction on Flexural and Impact Behaviour of GLARE Hybrid Composites
by: Santhosh M. S., et al.
Published: (2019-06-01)

Mechanical and Morphological Properties of Bio-Phenolic/Epoxy Polymer Blends
by: Ahmad Safwan Ismail, et al.
Published: (2021-02-01)

Hydrothermal Aging of an Epoxy Resin Filled with Carbon Nanofillers
by: Tatjana Glaskova-Kuzmina, et al.
Published: (2020-05-01)

Epoxy and epoxy novolac adhesive binders for structural reinforcement systems of building structures
by: Starovoitova Irina, et al.
Published: (2021-01-01)

Characterization of the Epoxy Resin and Carbon Fiber Reinforced Plastic Stress-Strain State by Modified Carbon Nanotubes
by: A. M. Yermakhanova, et al.
Published: (2018-05-01)

Size of FRP laminates to strengthen reinforced concrete sections in flexure
by: Ashour, Ashraf F.
Published: (2008)

Residual Flexural Performance of Epoxy Polymer Concrete under Hygrothermal Conditions and Ultraviolet Aging
by: Dongpeng Ma, et al.
Published: (2019-10-01)

Experimental Evaluation of the Influence of Aggregate Strength on the Flexural Cracking Behavior of Epoxy Asphalt Mixtures
by: Wei Xu, et al.
Published: (2020-04-01)

Mechanical behaviour of graphene and carbon fibre reinforced epoxy based hybrid nanocomposites for orthotic callipers
by: Nisha Kumari, et al.
Published: (2018-02-01)

Experimental investigation on compression ignition engine powered with pentanol and thevetia peruviana methyl ester under reactivity controlled compression ignition mode of operation
by: P.A. Harari, et al.
Published: (2021-06-01)

Synthesis and characterization of epoxy resin of 9,9′-bis-(3,5-dibromo-4-hydroxyphenyl) anthrone-10 and its jute composite
by: Jabal D. Thanki, et al.
Published: (2018-01-01)

Influence of Sand Size on Mechanical Properties of Fiber Reinforced Polymer Concrete
by: Mahdi Zainab H., et al.
Published: (2019-11-01)

Flexural Behaviour of Continuous FRP Reinforced Concrete Slabs
by: Mahroug, Mohamed E.M., et al.
Published: (2013)

Sustainable Adsorption Method for the Remediation of Crystal Violet Dye Using Nutraceutical Industrial Fenugreek Seed Spent
by: Syed Noeman Taqui, et al.
Published: (2021-08-01)

Adsorption Method for the Remediation of Brilliant Green Dye Using Halloysite Nanotube: Isotherm, Kinetic and Modeling Studies
by: Shareefraza J. Ukkund, et al.
Published: (2021-08-01)

Effect of Producer Gas from Redgram Stalk and Combustion Chamber Types on the Emission and Performance Characteristics of Diesel Engine
by: K. M. Akkoli, et al.
Published: (2021-09-01)

Behavior and Flexure Analysis of Balsa Wood Core Sandwich Composites: Experimental, Analytical and Finite Element Approaches
by: Nallagula, Sandeep
Published: (2006)

Flexural Behavior of CFRP Laminate at Elevated Temperature
by: Rzgar M. Abdalrahman
Published: (2017-08-01)

The Effect of Aging and Silanization on the Mechanical Properties of Fumed Silica-based Dental Composite
by: Khaje S, et al.
Published: (2015-12-01)

Altered rheokinetic and mechanical behavior of anhydride cured epoxy resin due to addition of cellulose nano-crystals
by: Sangeeta Sankhla, et al.
Published: (2021-12-01)