The effect of Na2S2O8 oxidant on improving the efficiency of photo-catalytic process of nano-TiO2 immobilized on concrete in DB71 removal

• Main Authors: Masoumeh Panbehkar Bishe, Bita Ayati
• Format: Article
• Language: fas
• Published: Tehran University of Medical Sciences 2014-07-01
• Series: سلامت و محیط
• Subjects: Irradiation intensity; TiO2; dye; direct blue 71; COD; pH
• Online Access: http://ijhe.tums.ac.ir/browse.php?a_code=A-10-25-5083&slc_lang=en&sid=1
• ISSN: 2008-2029; 2008-3718

Background and Objective: Most of the dyes used in the textile industries can be toxic and carcinogenic. One of the suitable technologies to remove them is advanced oxidation processes. The main purpose of this study was to investigate the positive effect of adding oxidant Na2S2O8 to the photocatalytic process using TiO2 nano-particles immobilized on concrete and UV radiation for removal of Direct Blue71 dye. Materials and Methods: Concrete was covered by 40 g/m2 of TiO2 nanoparticles using SSP method. After selecting suitable oxidant concentration and optimum pH, initial dye concentration, UV irradiation intensity, and time, the efficiency and rate of dye removal and breaking amounts of benzene rings and COD variation were investigated in two systems of UV/TiO2 and UV/TiO2/Na2S2O8. Results: In UV/TiO2 system, 50.48 percent dye removal was observed at initial dye concentration of 100 ppm, pH 9, and 90 Watt UV lamp after 55 minutes and for UV/TiO2/Na2S2O8 system, initial dye concentration of 200 ppm, pH 6.9, and 0.24 g/L oxidant under the same abovementioned conditions resulted in 88.65 percent dye removal. Conclusion: Oxidant addition increased the dye removal efficiency and decreased total time for complete decolorization indicating the positive effect of oxidant on photocatalytic process in dye removal.