Evaluation of the effect of the addition of bioethanol to gas oil on coking diesel engine injector terminals

Evaluation of the effect of the addition of bioethanol to gas oil on coking diesel engine injector terminals

The article presents the results of empirical research and their analysis regarding the impact of diesel oil and diesel oil mixture with bioethanol on coking the test injector nozzles of the XUD9 engine from PSA. The research included three fuel deals: diesel fuel as the base fuel and diesel oil mix...

Full description

Bibliographic Details
Main Authors:	Piotr ORLIŃSKI, Marcin K. WOJS, Mateusz BEDNARSKI, Mieczysław SIKORA
Format:	Article
Language:	English
Published:	Polskie Towarzystwo Naukowe Silników Spalinowych/Polish Scientific Society of Combustion Engines 2019-07-01
Series:	Combustion Engines
Subjects:	injection coking combustion fuel plant environmental protection engine diagnostics
Online Access:	http://www.journalssystem.com/cen/,116231,0,2.html

Similar Items

Detection of damage to the power supply system of diesel engine under field conditions
by: Paweł MAZURUK, et al.
Published: (2017-08-01)

Experimental Study of the Coking Phenomenon Effects on Spray Characteristics of the High Pressure Diesel Injector
by: M. Sheykhvazayefi, et al.
Published: (2020-01-01)

Research of Nitrogen Oxides Concentrations in Exhaust Gas of Compression Ignition Engine Fuelled with Alternative Fuel
by: Mieczysław Sikora, et al.
Published: (2021-06-01)

Numerical investigation of steam addition into the oxidizer on combustion behaviours of coke oven gas
by: Serhat KARYEYEN, et al.
Published: (2018-06-01)

Indirect Drying and Coking Characteristics of Coking Coal with Soda Residue Additive
by: Ze Zhang, et al.
Published: (2021-01-01)

Characterising coals for coke production and assessing coke: predicting coke quality based on coal petrography, rheology and coke petrography
by: Jordan, Pierre
Published: (2008)

Influence of parameters of delayed asphalt coking process on yield and quality of liquid and solid-phase products
by: Natalia K. KONDRASHEVA, et al.
Published: (2020-03-01)

Effect of KMnO4 on catalytic combustion performance of semi-coke
by: Kou Luyao, et al.
Published: (2020-10-01)

Comparison of Growth Characteristics and Properties of CVD TiN and TiO<sub>2</sub> Anti-Coking Coatings
by: Shiyun Tang, et al.
Published: (2019-08-01)

Effect of CaO on catalytic combustion of semi-coke
by: Kou Luyao, et al.
Published: (2021-01-01)

Mathematical modeling of a rotary hearth coke calciner
by: Hilde C. Meisingset, et al.
Published: (1995-10-01)

Techno-Economic Analysis of Pressurized Oxy-Fuel Combustion of Petroleum Coke
by: Hachem Hamadeh, et al.
Published: (2020-07-01)

Use of Alternative Raw Materials in Coke-Making: New Insights in the Use of Lignites for Blast Furnace Coke Production
by: Michał Rejdak, et al.
Published: (2020-06-01)

Experimental Studies of Injector Array Configurations for Circular Scramjet Combustors
by: Rock, Christopher
Published: (2017)

Delayed coking of South African petroleum heavy residues for the production of anode grade coke and automotive fuels
by: Clark, John Graham
Published: (2009)

Technologies of coke wastewater treatment in the frame of legislation in force
by: Bargieł Piotr, et al.
Published: (2018-05-01)

Stamp-Charged Coke-Making Technology—The Effect of Charge Density and the Addition of Semi-Soft Coals on the Structural, Textural and Quality Parameters of Coke
by: Michał Rejdak, et al.
Published: (2021-06-01)

Effects of Boron Carbide on Coking Behavior and Chemical Structure of High Volatile Coking Coal during Carbonization
by: Qiang Wu, et al.
Published: (2021-01-01)

Self-sustained combustion of low grade solid fuels in a stagnation-point reverse-flow combustor
by: Radhakrishnan, Arun
Published: (2014)

A Lean-Premixed Hydrogen Injector with Vane Driven Swirl for Application in Gas Turbines
by: Homitz, Joseph
Published: (2014)

The quality of coke and its consumption blast furnace process
by: E. Kardas, et al.
Published: (2021-01-01)

Experimental Model for Pollutants Monitoring into the Coke-Chemical Plant
by: Viorel MUNTEANU, et al.
Published: (2009-11-01)

Results of tuyere coke sampling with regard to application of appropriate coke strength after reaction (CSR) for a blast furnace
by: Shiau J-S., et al.
Published: (2017-01-01)

Production of cokes from pastes obtained by raw hydrocarbon electrocracking
by: A. I. Nikolaev
Published: (2014-08-01)

Material Balance in a Blast Furnace, when Replacing Coke with Coal Dust
by: Adrian VASILIU
Published: (2017-12-01)

TECHNICAL AND ENERGY PARAMETERS IMPROVEMENT OF DIESEL LOCOMOTIVES THROUGH THE INTRODUCTION OF AUTOMATED CONTROL SYSTEMS OF A DIESEL
by: M. I. Kapitsa, et al.
Published: (2015-04-01)

Elimination of Coke in an Aged Hydrotreating Catalyst via a Non-Thermal Plasma Process: Comparison with a Coked Zeolite
by: Hawraa Srour, et al.
Published: (2019-09-01)

The injector location impact on the fuel combustion process in a direct gasoline injection system
by: Maciej SIDOROWICZ, et al.
Published: (2018-05-01)

METHODS OF DIAGNOSING VEHICLE DIESEL INJECTORS
by: O. Vrublevskyi, et al.
Published: (2016-06-01)

Hydroxyl radicals as an indicator of knocking combustion in the dual-fuel compression-ignition engine
by: Jakub LASOCKI, et al.
Published: (2017-02-01)

Effect of Cu(NO<sub>3</sub>)<sub>2</sub> and Cu(CH<sub>3</sub>COO)<sub>2</sub> Activating Additives on Combustion Characteristics of Anthracite and Its Semi-Coke
by: Kirill Larionov, et al.
Published: (2020-11-01)

Dynamic Behaviour of Coke Drums PSVs During Blocked Outlet Condition
by: Vakilalroayaei, Hessam
Published: (2009)

Simulation of Combustion and Thermal-flow Inside a Petroleum Coke Rotary Calcining Kiln
by: Zhang, Zexuan
Published: (2007)

Numerical Investigation on Co-firing Characteristics of Semi-Coke and Lean Coal in a 600 MW Supercritical Wall-Fired Boiler
by: Chang’an Wang, et al.
Published: (2019-03-01)

A Five-Zone Model for Direct Injection Diesel Combustion
by: Asay, Rich
Published: (2003)

Investigating the effects of duct length and diameter and fuel-injector orifice diameter in a compression-ignition engine equipped with ducted fuel injection
by: Christopher W. Nilsen, et al.
Published: (2021-09-01)

The Effects of Coke Parameters and Circulating Flue Gas Characteristics on NOx Emission during Flue Gas Recirculation Sintering Process
by: Juntao Han, et al.
Published: (2019-10-01)

The Influence of Diesel Oil Improvers on Indices of Atomisation and Combustion in High-Efficiency Engines
by: Pielecha Ireneusz, et al.
Published: (2017-09-01)

Experimental Studies of Fuel Injection in a Diesel Engine with an Inclined Injector
by: V. G. Kamaltdinov, et al.
Published: (2019-07-01)

Influence of superdispersed additives to crude materials on morphology of coke
by: A. V. Petrov, et al.
Published: (2010-04-01)