Relative Density of SLM-Produced Aluminum Alloy Parts: Interpretation of Results

Relative Density of SLM-Produced Aluminum Alloy Parts: Interpretation of Results

Micrographic image analysis, tomography and the Archimedes method are commonly used to analyze the porosity of Selective Laser Melting (SLM)-produced parts and then to estimate the relative density. This article deals with the limitation of the relative density results to conclude on the quality of...

Full description

Bibliographic Details
Main Authors:	Corinne Arvieu, Cassiopée Galy, Emilie Le Guen, Eric Lacoste
Format:	Article
Language:	English
Published:	MDPI AG 2020-08-01
Series:	Journal of Manufacturing and Materials Processing
Subjects:	additive manufacturing selective laser melting porosity relative density measurement archimedes method AlSi7Mg0.6 and AM205 alloys
Online Access:	https://www.mdpi.com/2504-4494/4/3/83

Similar Items

On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties
by: Francesco Trevisan, et al.
Published: (2017-01-01)

Microstructure and Mechanical Properties of AlSi7Mg0.6 Aluminum Alloy Fabricated by Wire and Arc Additive Manufacturing Based on Cold Metal Transfer (WAAM-CMT)
by: Qingfeng Yang, et al.
Published: (2019-08-01)

Effect of Scan Strategies and Use of Support Structures on Surface Quality and Hardness of L-PBF AlSi10Mg Parts
by: Ronny M. Gouveia, et al.
Published: (2020-05-01)

Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg
by: Wolfgang Schneller, et al.
Published: (2019-02-01)

The Effects of Selective Laser Melting Process Parameters on Relative Density of the AlSi10Mg Parts and Suitable Procedures of the Archimedes Method
by: Shigang Bai, et al.
Published: (2019-02-01)

Influence of Powder Characteristics on Processability of AlSi12 Alloy Fabricated by Selective Laser Melting
by: Rustam Baitimerov, et al.
Published: (2018-05-01)

Performance Consistency of AlSi10Mg Alloy Manufactured by Simulating Multi Laser Beam Selective Laser Melting (SLM): Microstructures and Mechanical Properties
by: Bin Liu, et al.
Published: (2018-11-01)

Fracture–Mechanical Assessment of the Effect of Defects on the Fatigue Lifetime and Limit in Cast and Additively Manufactured Aluminum–Silicon Alloys from HCF to VHCF Regime
by: Jochen Tenkamp, et al.
Published: (2020-07-01)

Investigation and Optimization of the SLM and WEDM Processes’ Parameters for the AlSi10Mg-Sintered Part
by: Emilia Franczyk, et al.
Published: (2021-01-01)

Microstructural Characterization of the Anisotropy and Cyclic Deformation Behavior of Selective Laser Melted AlSi10Mg Structures
by: Mustafa Awd, et al.
Published: (2018-10-01)

Corrosion Behavior of AlSi10Mg Alloy Produced by Additive Manufacturing (AM) vs. Its Counterpart Gravity Cast Alloy
by: Avi Leon, et al.
Published: (2016-06-01)

Etude des interactions matériau/procédé en vue d'une optimisation des conditions opératoires du procédé de fabrication additive SLM sur des alliages d'aluminium pour des applications aéronautiques.
by: Galy, Cassiopee
Published: (2019)

Process Window for Highly Efficient Laser-Based Powder Bed Fusion of AlSi10Mg with Reduced Pore Formation
by: Artur Leis, et al.
Published: (2021-09-01)

Additive manufactured versus cast AlSi10Mg alloy: Microstructure and micromechanics
by: S.I. Shakil, et al.
Published: (2021-06-01)

Effect of Selective Laser Melting Process Parameters on the Quality of Al Alloy Parts: Powder Characterization, Density, Surface Roughness, and Dimensional Accuracy
by: Ahmed H. Maamoun, et al.
Published: (2018-11-01)

Ultrasonic Peening Treatment Used to Improve Stress Corrosion Resistance of AlSi10Mg Components Fabricated Using Selective Laser Melting
by: Xiaodong Xing, et al.
Published: (2019-01-01)

Microstructure and Properties of AlSi10Mg Powder for Selective Laser Melting
by: TANG Pengjun, et al.
Published: (2018-02-01)

The Effect of Selective Laser Melting Process Parameters on the Microstructure and Mechanical Properties of Al6061 and AlSi10Mg Alloys
by: Ahmed H. Maamoun, et al.
Published: (2018-12-01)

STATISTICAL DESCRIPTION OF LARGEST PORE SIZE IN MODIFIED AL-SI ALLOYS
by: Stanislava Fintová, et al.
Published: (2009-06-01)

Directed energy deposition of AlSi10Mg: Single track nonscalability and bulk properties
by: Parnian Kiani, et al.
Published: (2020-09-01)

VHCF Response up to 10<sup>9</sup> Cycles of SLM AlSi10Mg Specimens Built in a Vertical Direction
by: Davide S. Paolino, et al.
Published: (2019-07-01)

Investigation on the Microstructure and Mechanical Properties of CNTs-AlSi10Mg Composites Fabricated by Selective Laser Melting
by: Shixuan Luo, et al.
Published: (2021-02-01)

Degradation of AlSi10Mg powder during laser based powder bed fusion processing
by: Ahmad Raza, et al.
Published: (2021-01-01)

Effects of Build Orientation and Post Processing on the Mechanical Properties of Additively Manufactured AlSi10Mg
by: Ngo, Austin
Published: (2020)

Effect of Platform Temperature and Post-Processing Heat Treatment on the Fatigue Life of Additively Manufactured AlSi7Mg Alloy
by: Luiz Felipe Leitao Martins, et al.
Published: (2021-04-01)

The Use of Selective Laser Melting to Increase the Performance of AlSi9Cu3Fe Alloy
by: Michaela Fousova, et al.
Published: (2018-10-01)

Study of the Surface and Dimensional Quality of the AlSi10Mg Thin-Wall Components Manufactured by Selective Laser Melting
by: Muhammad Waqas, et al.
Published: (2021-05-01)

FATIGUE AND FRACTURE BEHAVIOR OF LPBF MANUFACTURED ALUMINUM ALLOY
by: Luke SUTTEY, et al.
Published: (2019-06-01)

Phase-field simulations and microstructural analysis of epitaxial growth during rapid solidification of additively manufactured AlSi10Mg alloy
by: Jiwon Park, et al.
Published: (2020-10-01)

Corrosion Behavior of Heat-Treated AlSi10Mg Manufactured by Laser Powder Bed Fusion
by: Marina Cabrini, et al.
Published: (2018-06-01)

A Comparative Study of Fatigue Energy Dissipation of Additive Manufactured and Cast AlSi10Mg Alloy
by: Chunxia Yang, et al.
Published: (2021-08-01)

Residual stresses in additively manufactured AlSi10Mg: Raman spectroscopy and X-ray diffraction analysis
by: Silvia Marola, et al.
Published: (2021-04-01)

Evaluation on the fatigue behavior of sand-blasted AlSi10Mg obtained by DMLS
by: Annalisa Pola, et al.
Published: (2019-06-01)

Evaluation on the fatigue behavior of sand-blasted AlSi10Mg obtained by DMLS
by: Annalisa Pola, et al.
Published: (2019-07-01)

Influence of Shot Peening on AlSi10Mg Parts Fabricated by Additive Manufacturing
by: Ahmed H. Maamoun, et al.
Published: (2018-06-01)

Effects of Platform Pre-Heating and Thermal-Treatment Strategies on Properties of AlSi10Mg Alloy Processed by Selective Laser Melting
by: Riccardo Casati, et al.
Published: (2018-11-01)

Research on the Thermal Behaviour of a Selectively Laser Melted Aluminium Alloy: Simulation and Experiment
by: Zhonghua Li, et al.
Published: (2018-07-01)

Performance of Maraging Steel Sleeves Produced by SLM with Subsequent Age Hardening
by: Piotr Tyczyński, et al.
Published: (2020-08-01)

Surface Treatment for Additive Manufactured Aluminum Alloys
by: Gavelius, Marianne, et al.
Published: (2020)

Research on Surface Roughness of AlSi10Mg Parts Fabricated by Laser Powder Bed Fusion
by: Bao-Qiang Li, et al.
Published: (2018-07-01)