Reducing the yield asymmetry in Mg-5Li-3Al-2Zn alloy by hot-extrusion and multi-pass rolling

Reducing the yield asymmetry in Mg-5Li-3Al-2Zn alloy by hot-extrusion and multi-pass rolling

Reducing the yield asymmetry is very important concern for wrought Mg-Li alloys. In this study, Mg-5Li-3Al-2 Zn (LAZ532) alloy was successfully produced by hot-extrusion followed by multi-pass rolling at 573 K. Microstructure evolution, mechanical properties and yield asymmetry reducing of LAZ532 al...

Full description

Bibliographic Details
Main Authors:	Xiaoqiang Li, Liang Ren, Qichi Le, Lei Bao, Peipeng Jin, Ping Wang, Chunlong Cheng, Xiong Zhou, Chenglu Hu
Format:	Article
Language:	English
Published:	KeAi Communications Co., Ltd. 2021-05-01
Series:	Journal of Magnesium and Alloys
Subjects:	Mg-Li alloy Tension and compression yield asymmetry Dynamically recrystallized Texture evolution
Online Access:	http://www.sciencedirect.com/science/article/pii/S2213956720301766

Similar Items

Effect of lithium content on the mechanical and corrosion behaviors of HCP binary Mg–Li alloys
by: Chuanqiang Li, et al.
Published: (2021-03-01)

Hot Tensile Deformation Behavior of Mg-4Li-1Al-0.5Y Alloy
by: Ting Yang, et al.
Published: (2021-09-01)

Hot Deformation Behavior and Microstructure Characterization of an Al-Cu-Li-Mg-Ag Alloy
by: Lingfei Cao, et al.
Published: (2020-05-01)

Microstructural and textural investigation of an Mg–Dy alloy after hot plane strain compression
by: Fairouze Guerza-Soualah, et al.
Published: (2020-12-01)

Distinct Recrystallization Pathways in a Cold-Rolled Al-2%Mg Alloy Evidenced by In-Situ Neutron Diffraction
by: Grigoreta M. Stoica, et al.
Published: (2018-09-01)

Dynamic Recrystallization Behavior and Corrosion Resistance of a Dual-Phase Mg-Li Alloy
by: Gang Liu, et al.
Published: (2018-03-01)

Reducing Yield Asymmetry between Tension and Compression by Fabricating ZK60/WE43 Bimetal Composites
by: Kangning Zhao, et al.
Published: (2020-01-01)

Hot Deformation Behavior of Ultralight Dual-Phase Mg-6li Alloy: Constitutive Model and Hot Processing Maps
by: Guo Li, et al.
Published: (2021-06-01)

Effect of Rolling Temperature on the Microstructure and Mechanical Properties of Mg-2Zn-0.4Y Alloy Subjected to Large Strain Rolling
by: Tong Wang, et al.
Published: (2018-11-01)

Improved Recrystallization Resistance of Al–Cu–Li–Zr Alloy through Ce Addition
by: Xinxiang Yu, et al.
Published: (2018-12-01)

Evolution of Recrystallized Grain and Texture of Cold-Drawn Pure Mg Wire and Their Effect on Mechanical Properties
by: Jiao Meng, et al.
Published: (2020-01-01)

Effect of circumferential strain rate on dynamic recrystallization and texture of Mg-13Gd-4Y-2Zn-0.5Zr alloy during rotary backward extrusion
by: Yingze Meng, et al.
Published: (2020-12-01)

Effects of Repetitive Upsetting Extrusion on the Microstructure and Texture of GWZK124 Alloy under Different Starting Temperatures
by: Guanshi Zhang, et al.
Published: (2019-07-01)

Development of a High Strength Mg-9Li Alloy via Multi-Pass ECAP and Post-Rolling
by: Edwin Eyram Klu, et al.
Published: (2019-09-01)

Production of Al/Mg-Li composite by the accumulative roll bonding process
by: Davood Rahmatabadi, et al.
Published: (2020-07-01)

Effect of rolling ratios on the microstructural evolution and corrosion performance of an as-rolled Mg-8 wt.%Li alloy
by: B.J. Wang, et al.
Published: (2021-03-01)

Texture evolution induced by twinning and dynamic recrystallization in dilute Mg-1Sn-1Zn-1Al alloy during hot compression
by: Meijuan Hao, et al.
Published: (2020-09-01)

Microstructural Characteristics and Mechanical Properties of a Novel Extruded Dilute Mg–Sn–Mn–Ca Alloy
by: Ming-ya Zhang, et al.
Published: (2019-12-01)

FRACTIONAL RECRYSTALLIZATION KINETICS IN DIRECTLY COLD ROLLED Al-Mg, Al-Mg-Sc AND Al-Mg-Sc-Zr ALLOY
by: M. S. Kaiser
Published: (2014-12-01)

ROLLING PROCESS WITH OHSAS AND TEXTURE FORMATION– A REVIEW
by: P. CHANDRAMOHAN, et al.
Published: (2009-03-01)

Microstructural Evolution of Multi-Pass Caliber-Rolled Mg–Sn and Mg–Sn–Mn Alloys
by: Jinyeong Yu, et al.
Published: (2020-09-01)

A comprehensive analysis on microstructure evolution of Mg-5.65Zn-0.66Zr alloy during hot deformation
by: Qian Cheng, et al.
Published: (2021-03-01)

Insight into the Role and Mechanism of Nano MgO on the Hot Compressive Deformation Behavior of Mg-Zn-Ca Alloys
by: Haoran Zheng, et al.
Published: (2020-10-01)

Tailoring One-Pass Asymmetric Rolling of Extra Low Carbon Steel for Shear Texture and Recrystallization
by: Satyaveer Singh Dhinwal, et al.
Published: (2019-06-01)

Microstructure and Texture Evolutions During Deep Drawing of Mg–Al–Mn Sheets at Elevated Temperatures
by: Jae-Hyung Cho, et al.
Published: (2020-08-01)

The effects of Ca and Mn on the microstructure, texture and mechanical properties of Mg-4 Zn alloy
by: Chunquan Liu, et al.
Published: (2021-05-01)

Effects of Initial Grain Size of Al-Zn-Mg-Cu Alloy on the Recrystallization Behavior and Recrystallization Mechanism in Isothermal Compression
by: Jiuhui Zhao, et al.
Published: (2019-01-01)

Dynamic precipitation and recrystallization mechanism during hot compression of Mg-Gd-Y-Zr alloy
by: Qian Zhang, et al.
Published: (2021-11-01)

Annealing Response of a Cold-Rolled Binary Al–10Mg Alloy
by: Lei Feng, et al.
Published: (2019-07-01)

Microstructure evolution, texture and mechanical properties of a Mg–Gd–Y–Zn–Zr alloy fabricated by cyclic expansion extrusion with an asymmetrical extrusion cavity: The influence of passes and processing route
by: Zhaoming Yan, et al.
Published: (2021-05-01)

Effects of the Mg/Si Ratio on Microstructure, Mechanical Properties, and Precipitation Behavior of Al–Mg–Si–1.0 wt %-Zn Alloys
by: Yong Li, et al.
Published: (2018-12-01)

Hydrogenation Ability of Mg-Li Alloys
by: Magda Pęska, et al.
Published: (2020-04-01)

Critical Rolling Process Parameters for Dynamic Recrystallization Behavior of AZ31 Magnesium Alloy Sheets
by: Wenke Wang, et al.
Published: (2018-10-01)

Particle-stimulated nucleation and recrystallization texture initiated by coarsened Al2CuLi phase in Al–Cu–Li alloy
by: Xiao-Ya Wang, et al.
Published: (2021-01-01)

Influence of rolling directions on microstructure, mechanical properties and anisotropy of Mg-5Li-1Al-0.5Y alloy
by: Tianzi Wang, et al.
Published: (2015-12-01)

The preferential growth and related textural evolution during static recrystallization in a cold-rolled Mg–Zn–Gd alloy
by: L.Y. Zhao, et al.
Published: (2021-05-01)

The Effect of Asymmetry on Strain Distribution, Microstructure and Texture of Multilayer Aluminum Composites Formed by Roll-Bonding
by: D. C. C. Magalhães, et al.
Published: (2020-12-01)

Martensite reversion and texture formation in 17Mn-0.06C TRIP/TWIP steel after hot cold rolling and annealing
by: Diana Pérez Escobar, et al.
Published: (2015-04-01)

Investigation of LiF, Mg and Ti (TLD-100) Reproducibility
by: Sadeghi M., et al.
Published: (2015-12-01)

Influence of different extrusion processes on mechanical properties of magnesium alloy
by: Qingshan Yang, et al.
Published: (2014-09-01)