Influence of Mo and Ta additions on solidification behavior of Ni3Al single crystal alloys
Ni3Al (Ni75Al25) and Ni3Al–2Mo/Ta (Ni73.5Al24.5Mo/Ta2) single crystals were prepared by the Bridgman method under high temperature gradient (~170 °C/cm) at the withdrawal rates of 5 and 20 μm/s. The experimental results showed that the addition of Mo decreased the liquidus and solidus temperatures,...
Main Authors: | Cheng Ai, Shusuo Li, Yunfei Liang, Shengkai Gong |
---|---|
Format: | Article |
Language: | English |
Published: |
Elsevier
2015-08-01
|
Series: | Progress in Natural Science: Materials International |
Subjects: | |
Online Access: | http://www.sciencedirect.com/science/article/pii/S1002007115000635 |
Similar Items
-
Primary Crystals of AlfeMnSi Intermetallics in the Cast AlSi Alloys
by: Warmuzek M.
Published: (2017-09-01) -
Effects of Nb/Ti additions and heat treatment on the microstructure evolution and hardness of as-cast and directionally solidified NiAl–Cr(Mo) alloy
by: Zhao Shang, et al.
Published: (2021-01-01) -
Effects of Thermal Variables of Solidification on the Microstructure, Hardness, and Microhardness of Cu-Al-Ni-Fe Alloys
by: Maurício Silva Nascimento, et al.
Published: (2019-04-01) -
Solidification characteristics of Fe-Ni peritectic alloy thin strips under a near-rapid solidification condition
by: Chang-jiang Song, et al.
Published: (2015-05-01) -
Simulation on solidification of an Al-Ni alloy under electromagnetic stirring
by: Sha Minghong, et al.
Published: (2012-08-01)