Using Continuum-Discontinuum Element Method to Model the Foliation-Affected Fracturing in Rock Brazilian Test
In this study, the continuum-discontinuum element method (CDEM) was used to investigate the tensile fracture mechanism of rock materials. An isotropic rock disk model and models considering different foliation inclinations were established, and three schemes were used to simulate the rock fracturing...
Main Authors: | , , , , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Hindawi Limited
2021-01-01
|
Series: | Advances in Civil Engineering |
Online Access: | http://dx.doi.org/10.1155/2021/1404568 |
id |
doaj-be60e660e76a4b4d9a49510c4d1b7481 |
---|---|
record_format |
Article |
spelling |
doaj-be60e660e76a4b4d9a49510c4d1b74812021-07-19T01:04:41ZengHindawi LimitedAdvances in Civil Engineering1687-80942021-01-01202110.1155/2021/1404568Using Continuum-Discontinuum Element Method to Model the Foliation-Affected Fracturing in Rock Brazilian TestQunlei Zhang0Zihan Zhi1Chun Feng2Ruixia Li3Jinchao Yue4Junyu Cong5School of Water Conservancy EngineeringSchool of Water Conservancy EngineeringInstitute of MechanicsSchool of Water Conservancy EngineeringSchool of Water Conservancy EngineeringGdem TechnologyIn this study, the continuum-discontinuum element method (CDEM) was used to investigate the tensile fracture mechanism of rock materials. An isotropic rock disk model and models considering different foliation inclinations were established, and three schemes were used to simulate the rock fracturing in Brazilian test. Then, the influences of the rock matrix and foliation strengths on anisotropy rock fracturing were investigated. Furtherly, simulation results were verified, and the rock fracture mechanisms were discussed. The results show that the rock fracturing in Brazilian test can be accurately simulated by CDEM, which is in accordance with the experimental results. For isotropic and horizontal foliation rock, the stress concentration in loading positions causes a local fracture of rock sample, and application of a local strengthening scheme can simulate the integral tension fracture of sample middle. As the foliation angle varies from 15° to 45°, the rock fracturing is affected by the stress concentration and foliation distribution. In splitting simulation, a strengthening scheme should be adopted to overcome this influence. As a result, the rock sample generates the sliding and compression-shear fracture. As the foliation angle changes from 45° to 75°, the foliation, rather than the matrix, dominates the fracture behavior of rock sample. For vertical foliations’ rock, as the middle foliation thickness is appropriately broadened, the simulation results are reasonable. In general, the tensile strength of anisotropic rock entirely decreases with an increase of foliation angle, and the effect of foliation strength on the tensile strength rock sample is larger than that of the rock matrix.http://dx.doi.org/10.1155/2021/1404568 |
collection |
DOAJ |
language |
English |
format |
Article |
sources |
DOAJ |
author |
Qunlei Zhang Zihan Zhi Chun Feng Ruixia Li Jinchao Yue Junyu Cong |
spellingShingle |
Qunlei Zhang Zihan Zhi Chun Feng Ruixia Li Jinchao Yue Junyu Cong Using Continuum-Discontinuum Element Method to Model the Foliation-Affected Fracturing in Rock Brazilian Test Advances in Civil Engineering |
author_facet |
Qunlei Zhang Zihan Zhi Chun Feng Ruixia Li Jinchao Yue Junyu Cong |
author_sort |
Qunlei Zhang |
title |
Using Continuum-Discontinuum Element Method to Model the Foliation-Affected Fracturing in Rock Brazilian Test |
title_short |
Using Continuum-Discontinuum Element Method to Model the Foliation-Affected Fracturing in Rock Brazilian Test |
title_full |
Using Continuum-Discontinuum Element Method to Model the Foliation-Affected Fracturing in Rock Brazilian Test |
title_fullStr |
Using Continuum-Discontinuum Element Method to Model the Foliation-Affected Fracturing in Rock Brazilian Test |
title_full_unstemmed |
Using Continuum-Discontinuum Element Method to Model the Foliation-Affected Fracturing in Rock Brazilian Test |
title_sort |
using continuum-discontinuum element method to model the foliation-affected fracturing in rock brazilian test |
publisher |
Hindawi Limited |
series |
Advances in Civil Engineering |
issn |
1687-8094 |
publishDate |
2021-01-01 |
description |
In this study, the continuum-discontinuum element method (CDEM) was used to investigate the tensile fracture mechanism of rock materials. An isotropic rock disk model and models considering different foliation inclinations were established, and three schemes were used to simulate the rock fracturing in Brazilian test. Then, the influences of the rock matrix and foliation strengths on anisotropy rock fracturing were investigated. Furtherly, simulation results were verified, and the rock fracture mechanisms were discussed. The results show that the rock fracturing in Brazilian test can be accurately simulated by CDEM, which is in accordance with the experimental results. For isotropic and horizontal foliation rock, the stress concentration in loading positions causes a local fracture of rock sample, and application of a local strengthening scheme can simulate the integral tension fracture of sample middle. As the foliation angle varies from 15° to 45°, the rock fracturing is affected by the stress concentration and foliation distribution. In splitting simulation, a strengthening scheme should be adopted to overcome this influence. As a result, the rock sample generates the sliding and compression-shear fracture. As the foliation angle changes from 45° to 75°, the foliation, rather than the matrix, dominates the fracture behavior of rock sample. For vertical foliations’ rock, as the middle foliation thickness is appropriately broadened, the simulation results are reasonable. In general, the tensile strength of anisotropic rock entirely decreases with an increase of foliation angle, and the effect of foliation strength on the tensile strength rock sample is larger than that of the rock matrix. |
url |
http://dx.doi.org/10.1155/2021/1404568 |
work_keys_str_mv |
AT qunleizhang usingcontinuumdiscontinuumelementmethodtomodelthefoliationaffectedfracturinginrockbraziliantest AT zihanzhi usingcontinuumdiscontinuumelementmethodtomodelthefoliationaffectedfracturinginrockbraziliantest AT chunfeng usingcontinuumdiscontinuumelementmethodtomodelthefoliationaffectedfracturinginrockbraziliantest AT ruixiali usingcontinuumdiscontinuumelementmethodtomodelthefoliationaffectedfracturinginrockbraziliantest AT jinchaoyue usingcontinuumdiscontinuumelementmethodtomodelthefoliationaffectedfracturinginrockbraziliantest AT junyucong usingcontinuumdiscontinuumelementmethodtomodelthefoliationaffectedfracturinginrockbraziliantest |
_version_ |
1721295474625871872 |