THERMOELECTRIC SEMICONDUCTOR DEVICE FOR CAUTERY OF BLEEDING

• Main Authors: Denis V. Yevdulov, Oleg V. Yevdulov, Nabi A. Nabiyev
• Format: Article
• Language: Russian
• Published: Daghestan State Technical University 2017-07-01
• Series: Vestnik Dagestanskogo Gosudarstvennogo Tehničeskogo Universiteta: Tehničeskie Nauki
• Subjects: thermoelectric system; thermoelectric transducer; cauterisation of bleeding; cryocautery; modelling; numerical experiment
• Online Access: https://vestnik.dgtu.ru/jour/article/view/365
• ISSN: 2073-6185; 2542-095X

Abstract. Objectives The aim of the work is to study the possibilities for using a semiconductor device to cauterise bleeding by means of cooling (cryocautery). Method The study is based on methods for approximate modeling of heat exchange processes. Results The construction of a device for cauterisation of bleeding, the actuating element of which consists of a thermoelectric battery operating in cooling mode at the time of blood flow cautery and in heating mode when removing the device from the damaged area, is considered. A model of a device, realised on the basis of the solution of the problem of solidification of a viscous liquid by the method of L.S. Leibenson, is proposed, taking into account the electro- and thermo-physical characteristics of the thermoelectric battery cold source. As a result of the numerical experiment, the dependence of the duration of the ice crust formation on tissues 1 mm thick (which corresponds to the cauterisation of bleeding) is obtained on the value of the supply current of the thermoelectric battery. With increasing current, the duration of the ice crust formation is reduced; this can be of the order of 160 s at 5 A. It was demonstrated that the selection of thermoelectric battery parameters and current should be guided by medical norms and standards in order to avoid frostbite in the tissues adjacent to the bleeding zone. Conclusion The special design of thermoelectric device provides an effective technical means for cauterising bleeding by freezing (cryocautery), providing high intensity of cooling, shortenened thrombus formation duration, and eliminating painful sensations when removing the device from a damaged area.