Dip-Coating Process Engineering and Performance Optimization for Three-State Electrochromic Devices

• Main Authors: Lu Wu, Dejiang Yang, Lixun Fei, Yue Huang, Fang Wu, Yiling Sun, Jiayuan Shi, Yong Xiang
• Format: Article
• Language: English
• Published: SpringerOpen 2017-06-01
• Series: Nanoscale Research Letters
• Subjects: Electrochromism; Electrodeposition; Titanium dioxide nanoparticle; Dip-coating process engineering; Optical performance
• Online Access: http://link.springer.com/article/10.1186/s11671-017-2163-0
• ISSN: 1931-7573; 1556-276X

Abstract Titanium dioxide (TiO2) nanoparticles were modified onto fluorine-doped tin oxide (FTO) via dip-coating technique with different nanoparticle sizes, lifting speeds, precursor concentrations, and dipping numbers. Electrodeposition-based electrochromic device with reversible three-state optical transformation (transparent, mirror, and black) was fabricated subsequently by sandwiching a suitable amount of gel electrolyte between modified FTO electrode and flat FTO electrode. Correlation between dip-coating process engineering, morphological features of TiO2 thin films, i.e., thickness and roughness, as well as performance of electrochromic devices, i.e., optical contrast, switching time, and cycling stability, were investigated. The modified device exhibits high optical contrast of 57%, the short coloration/bleaching switching time of 6 and 20 s, and excellent cycling stability after 1500 cycles of only 27% decrement rate by adjusting dip-coating processes engineering. The results in this study will provide valuable guidance for rational design of the electrochromic device with satisfactory performance.