Some aspects of model calculations of converter slag reduction process
A numerical method was used to study influence of the charge mass change on the process of converter slag reduction. A numerical simulation was performed with three different quantities of reduced slag. The relation between changes of Cu<sub>2</sub>O concentration and duration of the red...
Main Authors: | , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Croatian Metallurgical Society
2017-01-01
|
Series: | Metalurgija |
Subjects: | |
Online Access: | http://hrcak.srce.hr/file/249303 |
Summary: | A numerical method was used to study influence of the charge mass change on the process of converter slag reduction. A numerical simulation was performed with three different quantities of reduced slag. The relation between changes of Cu<sub>2</sub>O concentration and duration of the reduction process as well as between the rate of Cu<sub>2</sub>O reduction in the slag and Cu<sub>2</sub>O concentration were analysed. It was found out that the duration of the process is proportional to the amount of the treated charge. The rate of Cu<sub>2</sub>O reduction from converter slag decreases with the process duration and increases with increasing concentration of Cu<sub>2</sub>O in the slag. |
---|---|
ISSN: | 0543-5846 1334-2576 |