Strength and Solidification Mechanism of Silt Solidified by Polyurethane

Strength and Solidification Mechanism of Silt Solidified by Polyurethane

To determine the mechanism and strength characteristics of solidification of silt by a permeable polyurethane grouting material, the effects of polymer content, soil moisture, and immersion time on the unconfined compressive strength (UCS) of the silt have been studied. The results showed that the p...

Full description

Bibliographic Details
Main Authors:	Fengyuan Li, Chaojie Wang, Yangyang Xia, Yanjie Hao, Peng Zhao, Mingsheng Shi
Format:	Article
Language:	English
Published:	Hindawi Limited 2020-01-01
Series:	Advances in Civil Engineering
Online Access:	http://dx.doi.org/10.1155/2020/8824524

Similar Items

An Experimental Study on the Reinforcement of Silt with Permeable Polyurethane by Penetration Grouting
by: Chaojie Wang, et al.
Published: (2020-01-01)

Use of the Penetration Method to Evaluate of the Strength of Reservoir Silt solidified with cement
by: Chien Hung Lin, et al.

Solidification of additives for zinc-contaminated silt
by: Shihua Liang, et al.
Published: (2018-07-01)

Influence of Some Additives on the Properties of OPC Solidified Sandy Silt
by: Dazhi Wu, et al.
Published: (2021-08-01)

Solidification, microstructure and mechanical properties of rapidly solidified eutectic alloys
by: Jabczynski, Francis Stephen John
Published: (1979)

Effect of solidification rate on the coarsening behavior of precipitate in rapidly solidified Al-Si alloy
by: Zhiyong Cai, et al.
Published: (2016-08-01)

Effect of nonplastic silt content on undrained shear strength of sand–silt mixtures
by: Mohammad Emdadul Karim, et al.
Published: (2017-07-01)

Simulation and Experiment of Solidification Process for Directionally Solidified Industrial Gas Turbine Hollow Blades
by: LU Yu-zhang, et al.
Published: (2018-01-01)

The Directional Solidification, Microstructural Characterization and Deformation Behavior of β-Solidifying TiAl Alloy
by: Ning Cui, et al.
Published: (2019-04-01)

Interface Bonding Properties between Nonwater Reaction Polyurethane Polymer Materials and Concrete
by: Xijun Zhang, et al.
Published: (2021-01-01)

Analysis of elastic viscoplastic consolidation of sand drain foundations with exponential seepages
by: Yang Duanyang, et al.
Published: (2021-01-01)

Experimental Analysis of Control-Parameter Effects on the Solidification Microstructures of Directionally Solidified Lead-Tin Alloys
by: Li-ChiehWu, et al.
Published: (2013)

Microstructural evolution of directionally solidified DZ125 superalloy castings with different solidification methods
by: Ge Bingming, et al.
Published: (2013-01-01)

Effective and total stress strength interpretation for silts
by: Pena, Bonifacio I. dela
Published: (2014)

Microstructures, micro-segregation and solidification path of directionally solidified Ti-45Al-5Nb alloy
by: Liang-shun Luo, et al.
Published: (2016-03-01)

Formation Mechanism and Restraining Measures of Burning-on of DZ22B Directionally Solidified Blade
by: LI Fei, et al.
Published: (2018-10-01)

Strength and Stiffness of Stabilized Alluvial Silt under Frost Actions
by: Haibo Wang, et al.
Published: (2017-01-01)

The strength deformation properties of Smith Bay arctic silts
by: Young, Gretchen Anne
Published: (2005)

Structure and Strength of Directionally Solidified Eutectic Composites
by: Butler, H. E.
Published: (1978)

Impact-Induced Liquefaction Mechanism of Sandy Silt at Different Saturations
by: Heng Li, et al.
Published: (2021-01-01)

Interrelation of Solidification Processing Variables and Microstructure of a Horizontally Solidified Al-based 319.1 Alloy
by: Marlo COSTA, et al.
Published: (2017-08-01)

Microstructure Evolution of Directionally Solidified Mar-M247 LC Superalloy and Its Dependence on Solidification Variables
by: Chen, J., et al.
Published: (1999-02-01)

Study on Shear Strength Characteristics of Marine Silt Modified by Steel Slag
by: Liyan Wang, et al.
Published: (2021-01-01)

Effect of abruptly changing withdrawal rate on solidification microstructure in directionally solidified Al-4.5wt%Cu alloy
by: Yang Luyan, et al.
Published: (2014-01-01)

Examination of solidified and stabilized matrices as a result of solidification and stabilization process of arseniccontaining sludge with portland cement and lime
by: Tanapon Phenrat, et al.
Published: (2004-02-01)

On the mechanisms and kinetics of evaporation of a compacted silt
by: Mpawenayo Régis, et al.
Published: (2016-01-01)

Relationship between In-Situ and laboratory undrained shear strengths of Taipei silt.
by: Chen, Po-Jen, et al.
Published: (1996)

Undrained triaxial strength-deformation behavior of Harrison Bay Arctic silts
by: Ayan, Kathryn Donna June
Published: (2011)

The effect of back pressure on the shear strength of solidified bentonite-cement slurries
by: LIN, LI-HAI, et al.
Published: (1993)

Microscopic Mechanism of Cement Improving the Strength of Lime-Fly Ash-Stabilized Yellow River Alluvial Silt
by: Xiaobin Zhang, et al.
Published: (2020-01-01)

Analysis of strength characteristics of carbon fiber–reinforced microbial solidified sand
by: Rongkang Qiu, et al.
Published: (2019-11-01)

Critical undrained shear strength of sand-silt mixtures under monotonic loading
by: Mohamed Bensoula, et al.
Published: (2014-07-01)

Strength and Microstructural Assessment of Reconstituted and Stabilised Soft Soils with Varying Silt Contents
by: Yaxu Liu, et al.
Published: (2021-07-01)

SPECIFIC FEATURES OF OLIGOMERIC PRODUCT SOLIDIFICATION FROM POLYURETHANE WASTES AND THEIR PRACTICAL APPLICATION
by: V. N. Belyatsky, et al.
Published: (2012-04-01)

Study on Strength and Permeability of Silt Soils Improving by Tung Oil and Sticky Rice Juice
by: Xiao-Wu Tang, et al.
Published: (2020-01-01)

On Liquefaction Resistance of Sands/Silts in Kaohsiung
by: Zhang,Zhi-Hao, et al.
Published: (2018)

Ultrahigh strength and plasticity in laser rapid solidified Al–Si nanoscale eutectics
by: Huai-Hsun Lien, et al.
Published: (2020-08-01)

Cyclic loading of silt
by: Okorie, Aaron Onyemaechi Darlington
Published: (1991)

Effective stresses in silts.
by: Lyell, Alexander, P.
Published: (1962)

Mechanical Properties and Leaching Characteristics of Geopolymer-Solidified/Stabilized Lead-Contaminated Soil
by: Yuan-Yuan Li, et al.
Published: (2019-01-01)

Cannot write session to /tmp/vufind_sessions/sess_1rks89n4r9a7re8jq9ibh69bkk