KINEMATIC SCHEMES OF CUTTING IN MILLING
The presented article analyzes the used kinematic schemes of cutting in milling. With their change and the change in the kinematic ratio of the velocities of the elementary movements, the type of the work surface can be changed. The mathematical dependences presented in the article, describing th...
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Academica Brancusi
2018-05-01
|
| Series: | Fiabilitate şi Durabilitate |
| Subjects: | |
| Online Access: | http://www.utgjiu.ro/rev_mec/mecanica/pdf/2018-01/28_Evstati%20LEFTEROV,%20Tanya%20AVRAMOVA,%20Catalina%20IANASI%20-%20KINEMATIC%20SCHEMES%20OF%20CUTTING%20IN%20MILLING.pdf |
| Summary: | The presented article analyzes the used kinematic schemes of cutting in milling. With
their change and the change in the kinematic ratio of the velocities of the elementary movements,
the type of the work surface can be changed.
The mathematical dependences presented in the article, describing the trajectory of the relative
work motion of a cutting edge point, are used to conduct theoretical studies of the geometric
parameters of the milling cutter performed by simulation modeling in the environment of the
software SolidWorks.
|
|---|---|
| ISSN: | 1844-640X 1844-640X |