Understanding of Long-Term CO2-Brine-Rock Geochemical Reactions Using Numerical Modeling and Natural Analogue Study

• Main Authors: Huixing Zhu, Tianfu Xu, Hailong Tian, Guanhong Feng, Zhijie Yang, Bing Zhou
• Format: Article
• Language: English
• Published: Hindawi-Wiley 2019-01-01
• Series: Geofluids
• Online Access: http://dx.doi.org/10.1155/2019/1426061

To further understand the interactions of CO2-brine-rock at geological time scales, in this study, a 1D reactive transport model of CO2 intrusion into sandstone of the Longtan Formation (P2l) in the Huangqiao area, China, was constructed based on site-specific data. The simulation time is consistent with the retention time of CO2 in the Longtan sandstone Formation and is set to 20 Ma. The reactive transport model is calibrated and revised using the measured data for sandstone samples from Well X3 (i.e., the natural analogue). By comparing the simulation results with measured data for the natural analogue, the long-term geochemical reactions are investigated. The simulation results indicate that the brine-rock interactions induced by CO2 can be roughly divided into two stages. First, susceptible minerals (e.g., chlorite, ankerite, calcite, and feldspar minerals) dissolve rapidly under acidic conditions formed by the dissolution of CO2. The precipitation of siderite is facilitated by the dissolution of ankerite and chlorite. Smectite-Ca and dawsonite precipitate due to the dissolution of anorthite and albite, respectively. Dawsonite begins to convert into smectite-Na when albite is completely dissolved. As the reactions continue, intermediate products (i.e., illite, smectite-Na, and smectite-Ca) generated in the first stage become the reactants and subsequently react with CO2 and brine. These three clay minerals are not stable under acidic conditions and transform into kaolinite and paragenetic quartz in the later stage of reaction. Comparing the simulation results of the Base Case with the measured data for the natural analogue and inspired by previous studies, the scour of kaolinite is supposed to have occurred in this region and is considered in the revised model by introducing a coefficient of the scour of kaolinite (i.e., Case 2). The simulation results of Case 2 fit well with the measured data on mineral assemblage, and the trend of the sandstone porosity growth caused by the CO2-brine-rock reaction is captured by our simulation results. The combination of numerical simulation and natural analogue study indicates that the joint effects of long-term CO2-brine-rock reactions and scour of kaolinite increase the pore space of the host rock and result in an increase in quartz content in the sandstone.