Nanostructured Polymethylsiloxane/Fumed Silica Blends

• Main Authors: Iryna Protsak, Volodymyr M. Gun’ko, Volodymyr V. Turov, Tetyana V. Krupska, Eugeniy M. Pakhlov, Dong Zhang, Wen Dong, Zichun Le
• Format: Article
• Language: English
• Published: MDPI AG 2019-07-01
• Series: Materials
• Subjects: polymethylsiloxane/nanosilica blends; hydration effect; mechanical loading effect; textural characteristics; interfacial layer structure
• Online Access: https://www.mdpi.com/1996-1944/12/15/2409

Polymethylsiloxane (PMS) and fumed silica, alone and in a blended form (1:1 w/w), differently pretreated, hydrated, and treated again, were studied using TEM and SEM, nitrogen adsorption&#8722;desorption, ¹H MAS and ²⁹Si CP/MAS NMR spectroscopy, infrared spectroscopy, and methods of quantum chemistry. Analysis of the effects of adding water (0&#8722;0.5 g of water per gram of solids) to the blends while they are undergoing different mechanical treatment (stirring with weak (~1&#8722;2 kg/cm²) and strong (~20 kg/cm²) loading) show that both dry and wetted PMS (as a soft material) can be grafted onto a silica surface, even with weak mechanical loading, and enhanced mechanical loading leads to enhanced homogenization of the blends. The main evidence of this effect is strong nonadditive changes in the textural characteristics, which are 2&#8722;3 times smaller than additive those expected. All PMS/nanosilica blends, demonstrating a good distribution of nanosilica nanoparticles and their small aggregates in the polymer matrix (according to TEM and SEM images), are rather meso/microporous, with the main pore-size distribution peaks at <i>R</i> &gt; 10 nm in radius and average &lt;<i>R</i>_V&gt; values of 18&#8722;25 nm. The contributions of nanopores (<i>R</i> &lt; 1 nm), mesopores (1 nm &lt; <i>R</i> &lt; 25 nm), and macropores (25 nm &lt; <i>R</i> &lt; 100 nm), which are of importance for studied medical sorbents and drug carriers, depend strongly on the types of the materials and treatments, as well the amounts of water added. The developed technique (based on small additions of water and controlled mechanical loading) allows one to significantly change the morphological and textural characteristics of fumed silica (hydrocompaction), PMS (drying&#8722;wetting&#8722;drying), and PMS/A-300 blends (wetting&#8722;drying under mechanical loading), which is of importance from a practical point of view.