Comprehensive optimization of process parameters in rotary ultrasonic drilling of CFRP aimed at minimizing delamination

Comprehensive optimization of process parameters in rotary ultrasonic drilling of CFRP aimed at minimizing delamination

Delamination damage is one of the main problems in drilling of carbon fiber reinforced plastics (CFRP) laminates. In recent years, rotary ultrasonic drilling, a brand new machining process that results in better machining quality, has been attracting increasing attention. An experimental investigati...

Full description

Bibliographic Details
Main Authors:	Mohammad Baraheni, Saeid Amini
Format:	Article
Language:	English
Published:	KeAi Communications Co., Ltd. 2019-12-01
Series:	International Journal of Lightweight Materials and Manufacture
Online Access:	http://www.sciencedirect.com/science/article/pii/S2588840419300198

Similar Items

Augmentation of the Delamination Factor in Drilling of Carbon Fibre-Reinforced Polymer Composites (CFRP)
by: Sharizal Ahmad Sobri, et al.
Published: (2020-10-01)

DELAMINATION PREDICTION IN DRILLING OF CFRP COMPOSITES USING ARTIFICIAL NEURAL NETWORK
by: K. PALANIKUMAR, et al.
Published: (2011-04-01)

Ultrasonic-assisted friction drilling process of aerospace aluminum alloy (AA7075): FEA and experimental study
by: Mohammad Baraheni, et al.
Published: (2021-09-01)

A review on strengthening, delamination formation and suppression techniques during drilling of CFRP composites
by: Dhruv Rathod, et al.
Published: (2021-01-01)

A Study on the Application of Rotary Ultrasonic Technology to the Optimization of Drilling Burrs
by: Chiu, Shih-Chieh, et al.
Published: (2018)

Predictive Model of Delamination in Drilling of Carbon Fiber Reinforced Plastic (CFRP)Using Response Surface Methodology
by: Shuai-Yu Wu, et al.
Published: (2010)

Effect of delamination interface angle on Mode Ⅱ delamination behavior of CFRP laminates
by: ZHAO Wei, et al.
Published: (2019-09-01)

Finite element study into the effects of fiber orientations and stacking sequence on drilling induced delamination in CFRP/Al stack
by: Wang Gong-Dong, et al.
Published: (2018-04-01)

Optimization of rotary ultrasonic drilling of optical glass using Taguchi method and utility approach
by: Vikas Kumar, et al.
Published: (2019-06-01)

Numerical analysis on effect of PNF interlayer on CFRP delamination
by: ZHU Guo-wei, et al.
Published: (2019-10-01)

Experimental investigation of CFRP fracture toughness by delamination type
by: S. A. Chernyakin
Published: (2021-04-01)

A study on the effect of main process parameters of rotary ultrasonic machining for drilling BK7 glass
by: Saqib Anwar, et al.
Published: (2018-01-01)

Rotary ultrasonic drilling of Ti6Al4V: Effects of machining parameters and tool diameter
by: Saqib Anwar, et al.
Published: (2018-01-01)

ROP MATHEMATICAL MODEL OF ROTARY-ULTRASONIC CORE DRILLING OF BRITTLE MATERIAL
by: Mera Fayez Horne
Published: (2017-03-01)

Development of Ultrasonic Microholes Drilling and Process Parameters Optimization
by: Yi-Yuan Cho, et al.
Published: (2004)

Numerical analysis of the delamination in CFRP laminates: VCCT and XFEM assessment
by: S. Karmakov, et al.
Published: (2020-10-01)

Experimental investigation on delamination in nanocomposite drilling
by: Karimi Zarif N., et al.
Published: (2018-01-01)

Precise Drilling of Holes in Alumina Ceramic (Al<sub>2</sub>O<sub>3</sub>) by Rotary Ultrasonic Drilling and its Parameter Optimization using MOGA-II
by: Hisham Alkhalefah
Published: (2020-02-01)

Parameter optimization method for delamination defects detection of composite laminate using phased array ultrasonic
by: CAO Hong-yi, et al.
Published: (2020-09-01)

ANALYSIS OF DELAMINATION IN DRILLING OF COMPOSITE MATERIALS WITH SPECIAL DRILL BITS
by: Tsao Chung Chen, et al.
Published: (2003)

Experimental Set-up and Feasibility in Rotary Ultrasonic Drilling of Ceramic Composites Brake
by: Guo-Zhong Xiao, et al.
Published: (2005)

Impact Dynamics of a Percussive System Based on Rotary-Percussive Ultrasonic Drill
by: Yinchao Wang, et al.
Published: (2017-01-01)

Delaminating control on drilling the medium density fiber board with robust optimization
by: Jamaludin, Khairur Rijal, et al.
Published: (2012)

Identification of Delamination Defects in CFRP Materials through Lamb Wave Responses
by: Bruhschwein, Taylor John
Published: (2018)

Experimental Investigation of Delamination Formed by Bone Drilling
by: Serdar Koluaçik, et al.
Published: (2020-01-01)

THE EFFECT OF SUPPORT PLATE ON DRILLING-INDUCED DELAMINATION
by: Navid Zarif Karimi, et al.
Published: (2016-02-01)

Impact Dynamics Prediction of a Rotary-Percussive Ultrasonic Drill With a Free Mass
by: Deen Bai, et al.
Published: (2018-01-01)

Rotary-Percussive Ultrasonic Drill: An Effective Subsurface Penetrating Tool for Minor Planet Exploration
by: Yinchao Wang, et al.
Published: (2018-01-01)

Influence of Abrasive Waterjet Parameters on the Cutting and Drilling of CFRP/UNS A97075 and UNS A97075/CFRP Stacks
by: Raul Ruiz-Garcia, et al.
Published: (2018-12-01)

INVESTIGATION OF DRILLING PERFORMANCE IN CRYOGENIC DRILLING ON CFRP COMPOSITE LAMINATES
by: Xia, Tian
Published: (2014)

Thermo-Mechanical and Delamination Properties in Drilling GFRP Composites by Various Drill Angles
by: Usama A. Khashaba, et al.
Published: (2021-06-01)

Effect of Twist Drill Geometry and Drilling Parameters on Hole Quality in Single-Shot Drilling of CFRP/Al7075-T6 Composite Stack
by: Muhammad Hafiz Hassan, et al.
Published: (2021-07-01)

Percussive-Rotary Drilling Machine
by: G. T. Shiroky, et al.
Published: (2003-06-01)

Investigation of tool wear and multi-objective optimization in drilling of woven CFRP composite
by: Chih-Ying Wang, et al.
Published: (2017)

Justification of the technological parameters choice for well drilling by rotary steerable systems
by: Vladimir S. Litvinenko, et al.
Published: (2019-02-01)

Enhancing dimensional accuracy and surface integrity by helical milling of carbon fiber reinforced polymers
by: Saeid Amini, et al.
Published: (2019-12-01)

Experimental assessment of delamination extension on carbon / epoxy drilled plates
by: Luis Filipe S. Devesa, et al.
Published: (2021-07-01)

Study of Modeling Delamination Analysis in Drilling Reinforced Composite Materials
by: Chan-Yan Guo, et al.
Published: (2011)

Utilizing Suppressing Mechanism to Reduce Delamination in Drilling of Composite Materials
by: Chen, Yen-Chu, et al.
Published: (2012)

Critical Force of Delamination in Drilling Thin Tube of Composite Material
by: Chen, Mu Shou, et al.
Published: (2015)