A Multifrequency Heterodyne Phase Error Compensation Method for 3D Reconstruction
In view of the problem of “jumping points” in the phase unwrapping of the multifrequency heterodyne principle, this paper proposes a novel method to improve the multifrequency heterodyne. By solving the root-mean-square error of the original frequency function, it includes the relationship between t...
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Hindawi Limited
2020-01-01
|
| Series: | Journal of Sensors |
| Online Access: | http://dx.doi.org/10.1155/2020/8833305 |
| Summary: | In view of the problem of “jumping points” in the phase unwrapping of the multifrequency heterodyne principle, this paper proposes a novel method to improve the multifrequency heterodyne. By solving the root-mean-square error of the original frequency function, it includes the relationship between the error and the adjacent phase in the condition of constrained phase unwrapping, and it compensates phase ±2π of the skip point. To ensure the accuracy of phase unwrapping, the function with a “jump point” after each phase unwrapping and the absolute phase curve of the principal value function are used to establish the threshold judgment model of the least square method, and the initial phase unwrapping of the principal value function with different frequencies is carried out continuously. The simulation analysis of phase compensation with the four-step phase-shifting method shows that the error is reduced to 36% under the set environment. The experimental result of 3D reconstruction by measuring the flatness of the plate shows that the error decreases by 41% after phase compensation compared with before phase compensation. The three-dimensional reconstruction experiment of pitch measurement with a nut shows that the nut after phase compensation is smooth without noise, and the pitch error is 0.033 mm, which verified the method is workable and effective. |
|---|---|
| ISSN: | 1687-725X 1687-7268 |