Interface Characteristics of Ti-Clad V–4Cr–4Ti Alloy Diffusion-Bonded Joint Produced by Hot Forging

Interface Characteristics of Ti-Clad V–4Cr–4Ti Alloy Diffusion-Bonded Joint Produced by Hot Forging

Diffusion bonding of V–4Cr–4Ti alloy to pure titanium (Ti) was carried out by hot forging in the temperature range between 1150 °C and 950 °C. The microstructure and mechanical properties of the bonded joint were determined by using light optical microscopy (OM), scanning electron microscopy (SEM),...

Full description

Bibliographic Details
Main Authors:	Gaowei Zhang, Wentuo Han, Xiaoou Yi, Farong Wan
Format:	Article
Language:	English
Published:	MDPI AG 2018-04-01
Series:	Applied Sciences
Subjects:	V–4Cr–4Ti/Ti joint interface characteristics hot forging diffusion bonded interface strength
Online Access:	http://www.mdpi.com/2076-3417/8/4/577

Similar Items

On the properties of hot forged Ti-6Al-4V alloy aimed for surgical implants
by: Marija Mihailović, et al.
Published: (2019-03-01)

Ultrasonic velocity variation of Ti6Al4V Ti-alloy bars under conventional forging combined with triple heat treatment
by: Han Feixiao, et al.
Published: (2020-01-01)

Flow behavior of commercial grade Ti-6Al-4V with lamellar structure in isotherm forging and kinetic analysis of process
by: H. Omidvar, et al.
Published: (2011-12-01)

Practical Use of Hot-Forged-Type Ti-42Al-5Mn and Various Recent Improvements
by: Toshimitsu Tetsui
Published: (2021-08-01)

Hot Deformation Behavior and Pulse Current Auxiliary Isothermal Forging of Hot Pressing Sintering TiAl Based Alloys
by: Chengcheng Shi, et al.
Published: (2017-12-01)

Effects of annealing on the interface microstructures and mechanical properties of hot roll bonded Ti6Al4V/AA6061 clad sheets
by: Pengju Wang, et al.
Published: (2020-09-01)

Effect of Direct Powder Forging Process on the Mechanical Properties and Microstructural of Ti-6Al-4V ELI
by: Sébastien Germain Careau, et al.
Published: (2021-08-01)

3D-printed Ti6Al4V femoral component of knee: Improvements in wear and biological properties by AIP TiN and TiCrN coating
by: JunJie Ni, et al.
Published: (2021-09-01)

Preparation of V–4Cr–4Ti Alloys from Mixed Oxides via Electro-Deoxidation Process in Molten Salt
by: Xiaozhou Cao, et al.
Published: (2020-08-01)

Numerical Investigation on the Strain Evolution of Ti-6Al-4V Alloy during Multi-directional Forging at Elevated Temperatures
by: Yan Chenkan, et al.
Published: (2018-06-01)

Mechanical Properties of Powder Metallugry (Ti-6Al-4V) with Hot Isostatic Pressing
by: M. A. Elfghi, et al.
Published: (2020-06-01)

Characterization of a high strength Al-alloy interlayer for mechanical bonding of Ti to AZ31 and associated tri-layered clad
by: Yasser Fouad
Published: (2014-06-01)

Flow Stress of Ti-6Al-4V during Hot Deformation: Decision Tree Modeling
by: Seong-Sik Lim, et al.
Published: (2020-06-01)

Hot Corrosion Behavior of Arc‐Sprayed NiCrB and NiCrTi Coatings with Different Oxide Contents
by: Guo, X., et al.
Published: (2022)

The Bonding of Additive Manufactured Ti-6Al-4V via the Powder Interlayer Bonding (PIB) Process
by: Davies P., et al.
Published: (2020-01-01)

The Bonding of Additive Manufactured Ti-6Al-4V via the Powder Interlayer Bonding (PIB) Process
by: Davies P., et al.
Published: (2020-01-01)

Evaporation of Ti/Cr/Ti Multilayer on Flexible Polyimide and Its Application for Strain Sensor
by: Yu-Jen Hsiao, et al.
Published: (2021-04-01)

Diffusion Bonding of Ti6Al4V to Al<sub>2</sub>O<sub>3</sub> Using Ni/Ti Reactive Multilayers
by: Marcionilo Silva, et al.
Published: (2021-04-01)

Predicting the Microstructure of a Valve Head during the Hot Forging of Steel 21-4N
by: Hongchao Ji, et al.
Published: (2018-05-01)

Effect of Multi-Directional Forging on the Microstructure and Mechanical Properties of β-Solidifying TiAl Alloy
by: Ning Cui, et al.
Published: (2019-04-01)

Analysis Of Deformation And Microstructural Evolution In The Hot Forging Of The Ti-6Al-4V Alloy
by: Kukuryk M.
Published: (2015-06-01)

Estudo dos fenômenos da fluência, corrosão e oxidação isotérmica na liga Ti-6Al-4V submetida aos revestimentos de TiN e TiAlN depositados pela técnica de PVD assistida por plasma
by: Verônica Mara Cortez Alves de Oliveira
Published: (2014)

Estudo dos fenômenos da fluência, corrosão e oxidação isotérmica na liga Ti-6Al-4V submetida aos revestimentos de TiN e TiAlN depositados pela técnica de PVD assistida por plasma
by: Oliveira, Verônica Mara Cortez Alves de
Published: (2014)

Laser Surface Texturing and Electropolishing of CoCr and Ti6Al4V-ELI Alloys for Biomedical Applications
by: Jesús A. Sandoval-Robles, et al.
Published: (2020-11-01)

Effect of Ti Addition on the Residual Aluminium Content and Mechanical Properties of the B4C-Al Composites Produced by Vacuum Infiltration / Wpływ Dodatku Tytanu Na Resztkową Zawartość Aluminium I Właściwości Mechaniczne Kompozytów B4C-Al Wytworzonych Przez Infiltrację Próżniową
by: Xiaozhou Cao, et al.
Published: (2015-12-01)

Joining Alumina to Titanium Alloys Using Ag-Cu Sputter-Coated Ti Brazing Filler
by: Omid Emadinia, et al.
Published: (2020-10-01)

Preparation and Characterization of TiO2 Nanostructure by TiCl4 Hydrolysis with Additive NaOH
by: Rashed Taleb Rasheed
Published: (2018-04-01)

Corrosion behavior of Ti and TI6Al4V in citrate buffers containing fluoride ions
by: Anelise Marlene Schmidt, et al.
Published: (2010-03-01)

Effect of post-weld heat treatment on microstructure, hardness and low-temperature impact toughness of electron beam welds of NIFS-HEAT-2 and CEA-J57 heats of V–4Ti–4Cr alloy
by: V. Tsisar, et al.
Published: (2016-12-01)

Effect of interface on mechanical properties and formability of Ti/Al/Ti laminated composites
by: Miao Cao, et al.
Published: (2021-09-01)

Microstructure and Mechanical Properties of Vacuum Diffusion Bonded Ti<sub>2</sub>AlNb/Ti/TC4 Joint
by: Yifeng Wang, et al.
Published: (2021-07-01)

Work-softening mechanism of Cu-Cr-Ti-Si alloy
by: YUAN Ji-hui, et al.
Published: (2020-11-01)

The mechanism of hot crack formation in Ti-6A1-4V during cold crucible continuous casting
by: Hongsheng DING
Published: (2004-08-01)

Effect of Al Layer Thickness on the Bonding and Mechanical Behavior of a Mg-(Al-)Ti Laminated Sheet Prepared by Hot-Rolling after Differential Preheating Treatment
by: Feng, Y., et al.
Published: (2022)

Impact of metal/ceramic interactions on interfacial shear strength: Study of Cr/TiN using a new modified embedded-atom potential
by: Nisha Dhariwal, et al.
Published: (2021-11-01)

Effect of Hot Isostatic Pressing on Microstructures and Mechanical Properties of Ti6Al4V Fabricated by Electron Beam Melting
by: Changyong Liu, et al.
Published: (2020-04-01)

Case Study of the Effect of Precoating on the Decarburization of the Surface Layer of Forged Parts during the Hot Die Forging Process
by: Paweł Widomski, et al.
Published: (2021-01-01)

Accuracy and Surface Quality Improvements in the Manufacturing of Ti-6Al-4V Parts Using Hot Single Point Incremental Forming
by: Mikel Ortiz, et al.
Published: (2019-06-01)

Fabrication and Mechanical Properties of Cr<sub>2</sub>AlC MAX Phase Coatings on TiBw/Ti6Al4V Composite Prepared by HiPIMS
by: Muhammad Waqas Qureshi, et al.
Published: (2021-02-01)

Electrochemical behavior of Ti and Ti6Al4V in aqueous solutions of citric acid containing halides
by: Anelise Marlene Schmidt, et al.
Published: (2006-12-01)

Cannot write session to /tmp/vufind_sessions/sess_0c20q3a9pptg85deforbl6h6st