Improvement of the procedure of new filter masks development

• Main Authors: Cheberyachko Serhii, Cheberyachko Yurii, Radchuk Dmytro, Deryugin Oleg, Nesterova Olha
• Format: Article
• Language: English
• Published: EDP Sciences 2020-01-01
• Series: MATEC Web of Conferences
• Online Access: https://www.matec-conferences.org/articles/matecconf/pdf/2020/01/matecconf_sesam20_00038.pdf
• ISSN: 2261-236X

The purpose is to substantiate theoretically the design of elastomeric half mask and canister of respirator of long-term protection. To develop the models for theoretical calculations of protective properties of dust masks the theory of non-stationary filtration and hydro aerodynamics was applied. To develop the digital model of a head the downhill simplex method was applied reflecting separate face features considering sex or age; to determine the halfmask surface the free energy equation for bowed plate being described by two-dimension spline surface was used with its unknown coefficients determined by method of proportional parts based on three-dimension coordinates of anthropometric face features. The main anthropometric face features influencing halfmasks design were determined to develop polygonous 3D model of head. According to its determined basic coordinates the surface of halfmask was determined using method of interpolation. Considering the mathematical model describing the movement of dust flows near a halfmask and in canister the dependences of distribution of air flow speed in a canister of variable geometry were set and kinematic parameters of dust-laden airflow according to a canister volume were determined. Reasonable geometric parameters of canister were determined; transient modulation from filter to inlet valve hole is performed as a contractor.