Use of microscopy techniques in failure analysis of the plastic injection molded parts to prevent the risks of serial defects in the assembly processes
Nowadays, the plastic injected molded parts are components used in the automobile for both exterior and interior. A mechatronic device uses those molded parts for actuating in order to reach some effect; therefore they should be durable and aesthetically satisfying the customer requirements. The aim...
Main Authors: | Braga Ion Cristian, Udroiu Razvan, Nedelcu Anisor |
---|---|
Format: | Article |
Language: | English |
Published: |
EDP Sciences
2017-01-01
|
Series: | MATEC Web of Conferences |
Online Access: | https://doi.org/10.1051/matecconf/201711204009 |
Similar Items
-
Risk reduction in dimension inspection of the plastic injection-molded parts from mechatronic devices by using optical 3D measuring techniques
by: Braga Ion Cristian, et al.
Published: (2017-01-01) -
Studies of the laser etching on painted plastic parts to prevent the risks of engraving failures at mechatronic devices
by: Braga Ion Cristian, et al.
Published: (2017-01-01) -
Improving the laser engraving quality of padpainted and spray-painted mechatronic devices
by: Braga Ion Cristian, et al.
Published: (2019-01-01) -
Studies on robotic testing equipment used in mechatronic devices manufacturing processes to improve the root cause analysis
by: Braga Ion Cristian, et al.
Published: (2018-01-01) -
Evaluating the Quality Surface Performance of Additive Manufacturing Systems: Methodology and a Material Jetting Case Study
by: Razvan Udroiu, et al.
Published: (2019-03-01)