| Summary: | This article discusses the formation of residual stresses during the assembly of automotive glass. The influence of various parameters of the adhesive bead on the spatial deviations of glasses during their installation is shown. Currently, the glass assembly technology involves filling the gap between the automotive glass and the car body with a glue roller. It has been established that the formation of residual stresses is influenced by the width and thickness of the glue roll, with a minimum width of the glue roll during drying, a discontinuity of the glue joint along the contour is possible, and with a maximum width, unacceptable residual deformations occur in the glass, which lead to cracks.
|
|---|
