Qualitative yaw stability analysis of free-yawing downwind turbines
<p>This article qualitatively shows the yaw stability of a free-yawing downwind turbine and the ability of the turbine to align passively with the wind direction using a model with 2 degrees of freedom. An existing model of a Suzlon S111 upwind 2.1 MW turbine is converted into a dow...
Main Authors: | , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Copernicus Publications
2019-05-01
|
Series: | Wind Energy Science |
Online Access: | https://www.wind-energ-sci.net/4/233/2019/wes-4-233-2019.pdf |
Summary: | <p>This article qualitatively shows the yaw stability of a free-yawing downwind turbine and the ability of the turbine to align passively with the wind direction using a model with 2 degrees of freedom. An existing model of a Suzlon S111 upwind 2.1 MW turbine is converted into a downwind configuration with a 5<span class="inline-formula"><sup>∘</sup></span> tilt and a 3.5<span class="inline-formula"><sup>∘</sup></span> downwind cone angle. The analysis shows
that the static tilt angle causes a wind-speed-dependent yaw misalignment of up to <span class="inline-formula">−19</span><span class="inline-formula"><sup>∘</sup></span> due to the projection of the torque onto the yaw bearing and the skewed aerodynamic forces caused by wind speed projection. With increased cone angles, the yaw stiffness can be increased for better yaw alignment and the stabilization of the free-yaw motion. The shaft length
influences the yaw alignment only for high wind speeds and cannot
significantly contribute to the damping of the free-yaw mode within the
investigated range. Asymmetric flapwise blade flexibility is seen to
significantly decrease the damping of the free-yaw mode, leading to
instability at wind speeds higher than 19 m s<span class="inline-formula"><sup>−1</sup></span>. It is shown that this
additional degree of freedom is needed to predict the qualitative yaw
behaviour of a free-yawing downwind wind turbine.</p> |
---|---|
ISSN: | 2366-7443 2366-7451 |