A novel de‐noising method based on coherence average for ultrasonic signal of partial discharge in transformer
Abstract Ultrasonic method is widely used for the detection and location of partial discharge (PD) in transformer, however, the measured ultrasonic signal is usually corrupted by noise, and sometimes is even buried by noise entirely. Therefore, the de‐noising of the measured signal is essential. Con...
Main Authors: | Jiangrong Cheng, Yuan Xu, Dengwei Ding, Weidong Liu |
---|---|
Format: | Article |
Language: | English |
Published: |
Wiley
2021-05-01
|
Series: | IET Science, Measurement & Technology |
Online Access: | https://doi.org/10.1049/smt2.12031 |
Similar Items
-
Investigation of sensitivity of the ultra-high frequency partial-discharge detection technology for micro-crack in epoxy insulator in GIS
by: Jiangrong Cheng, et al.
Published: (2020-04-01) -
Ultrasonic partial discharge monitoring method on instrument transformers
by: Kartalović Nenad, et al.
Published: (2012-01-01) -
Novel noise reduction method based on improved empirical wavelet transform and kurtosis for partial discharge signal of high-voltage cables
by: Xinghe Ma, et al.
Published: (2020-11-01) -
Energy Estimation of Partial Discharge Pulse Signals Based on Noise Parameters
by: Xiaoxin Chen, et al.
Published: (2016-01-01) -
The Study of Partial Discharges Analysis in Epoxy-Resin Transformers Using Ultrasonic Technology
by: Li-Jung Chen, et al.
Published: (2007)