Experiment on vibration control of a two-link flexible manipulator using an input shaper and adaptive positive position feedback

• Main Authors: ZhongYi Chu, Jing Cui
• Format: Article
• Language: English
• Published: SAGE Publishing 2015-10-01
• Series: Advances in Mechanical Engineering
• Online Access: https://doi.org/10.1177/1687814015610466

This article presents a novel approach for actively suppressing the vibration within a two-link flexible manipulator to adapt the variation in the model parameters, which is composed of an input shaper and multimode adaptive positive position feedback. Input shaper is applied to shape the command to avoid the flexible vibration in the manoeuvre motion, and the residual vibration can be suppressed by a piezo actuator with the adaptive positive position feedback approach. To demonstrate the approach, two sets of piezoelectric actuator/stain gauge sensor pairs are bonded to the surface of the two-link flexible manipulator; slewing of the flexible link induces vibrations in the link that persist long after the motors stop moving. Vibration suppression is achieved through a combined scheme of input shaper–based motor motion control and an adaptive positive position feedback–based piezo actuator controller. Experimental results show the effectiveness of the proposed approach and its suitability for implementation in an existing robot.