| Summary: | The influences of rockfall on human engineering have been increasing in Tibet with the rapid development of the western region of China. This study proposed a multi-approach to carry out rockfall investigation and hazard assessment. As a case study, the rockfall hazard from Nang County to Jiacha County in Tibet was assessed. Firstly, we summarized the characteristics of spatial distributions of typical rockfall sources using Digital Elevation Model (DEM) and unmanned aerial vehicle (UAV) aerial images with resolution of 10 m. According to the thresholds of slope angle, slope aspect and elevation distribution of typical rockfall sources, we obtained all of the rockfall source areas in study area semi-automatically in ArcGIS platform. Secondly, we improved the efficiency and accuracy of detailed field investigation by using a three-dimensional (3D) point cloud model and rock mass structure extraction software. According to the analysis result, the dominant joint set was J1, whose orientation was basically consistent with the Yarlung Tsangpo Fault. The combination of J1, J2 and J4 cut the rock mass into blocks of wedge with J1 as potential sliding planes. It was indicated that the stability of the rock mass in study area was mainly controlled by the characters of joint sets. Finally, we applied the improved reclassification criteria of the Rockfall Hazard Vector (RHV) method in rockfall hazard assessment according to protection capabilities of the current protection facilities, making the result more valuable for geohazards prevention work. Based on this multi-approach, we obtained that 10.92% of the 306 provincial highway and 9.38% of the power line were threatened by potential rockfall hazards in study area. The hazard assessment results of study area were also of certain guiding value to the linear project planning and geohazards prevention work.
|
|---|
