A New Design of Recycled Ethylene Propylene Diene Monomer Rubber Modified Epoxy Based Composites Reinforced with Alumina Fiber: Fracture Behavior and Damage Analyses

A New Design of Recycled Ethylene Propylene Diene Monomer Rubber Modified Epoxy Based Composites Reinforced with Alumina Fiber: Fracture Behavior and Damage Analyses

This study proposes a new design of lightweight and cost-efficient composite materials for the automotive industry using recycled fresh scrap rubbers (EPDM (ethylene propylene diene monomer) rubbers), epoxy resin and alumina (Al<sub>2</sub>O<sub>3</sub>) fibers (AF). Three-po...

Full description

Bibliographic Details
Main Authors:	Alaeddin Burak Irez, Georges Zambelis, Emin Bayraktar
Format:	Article
Language:	English
Published:	MDPI AG 2019-08-01
Series:	Materials
Subjects:	three-point bending fracture toughness toughening mechanisms alumina fiber recycled rubber SEM
Online Access:	https://www.mdpi.com/1996-1944/12/17/2729

Similar Items

Fracture Toughness Analysis of Epoxy-Recycled Rubber-Based Composite Reinforced with Graphene Nanoplatelets for Structural Applications in Automotive and Aeronautics
by: Alaeddin Burak Irez, et al.
Published: (2020-02-01)

Conception, élaboration et caractérisation des composites modifiées par incorporation de particules de caoutchouc recyclées et devulcanisées à base d’époxy : Une approche expérimentale pour des mécanismes de renforcement
by: Irez, Alaeddin Burak
Published: (2018)

Processing and mechanical characterization of Al2O3/Ni and Al2O3/Co composites by pressureless sintering of nanocomposite powders
by: Betül Kafkaslioğlu Yildiz, et al.
Published: (2018-06-01)

Mixed-Mode Interlaminar Fracture Toughness of Glass and Carbon Fibre Powder Epoxy Composites—For Design of Wind and Tidal Turbine Blades
by: Christophe Floreani, et al.
Published: (2021-04-01)

Structure-property relationship in core-shell rubber toughened epoxy nanocomposites
by: Gam, Ki Tak
Published: (2004)

Oxide Bioceramic Composites in Orthopedics and Dentistry
by: Corrado Piconi, et al.
Published: (2021-08-01)

Comparative Study on Toughening Effect of PTS and PTK in Various Epoxy Resins
by: Woong Kwon, et al.
Published: (2021-02-01)

Improving the fracture toughness properties of epoxy using graphene nanoplatelets at low filler content
by: Nadiim Domun, et al.
Published: (2017-07-01)

Nanoscale Plasticity Behavior of Additive-Manufactured Zirconia-Toughened Alumina Ceramics during Nanoindentation
by: Wenli Li, et al.
Published: (2020-02-01)

Behavior of Ethylene Propylene Diene Rubber
by: Chung, Wen-Ruey, et al.
Published: (1996)

Dielectric Relaxation Spectroscopy in Synthetic Rubber Polymers: Nitrile Butadiene Rubber and Ethylene Propylene Diene Monomer
by: Young Il Moon, et al.
Published: (2020-01-01)

Thermomechanical Devulcanisation of Ethylene Propylene Diene Monomer (EPDM) Rubber and Its Subsequent Reintegration into Virgin Rubber
by: Dávid Zoltán Pirityi, et al.
Published: (2021-04-01)

Improving Fracture Toughness of Epoxy Nanocomposites by Silica Nanoparticles
by: Seyed Reza Akherati Sany, et al.
Published: (2017-04-01)

Determination of Polychloroprene Content in Rubber Blend Containing Ethylene Propylene Diene Monomer by Infrared Techniques
by: Paulo Santos Rigoli, et al.
Published: (2021-02-01)

Gas chromatography techniques to evaluate the hydrogen permeation characteristics in rubber: ethylene propylene diene monomer
by: Jae Kap Jung, et al.
Published: (2021-03-01)

Phlogopite-Reinforced Natural Rubber (NR)/Ethylene-Propylene-Diene Monomer Rubber (EPDM) Composites with Aminosilane Compatibilizer
by: Sung-Hun Lee, et al.
Published: (2021-07-01)

Morphology Development and Fracture Properties of Toughened Epoxy Thermosets
by: Kwon, Ojin
Published: (2014)

Mechanical properties of alumina trihydrate filled polypropylene/ethylene propylene diene monomer composites for cable applications
by: Reza Hashemi Farzad, et al.
Published: (2013)

Ethylene Propylene Diene Monomer (EPDM) Effect on Asphalt Performance
by: Amin Chegenizadeh, et al.
Published: (2021-07-01)

Improved Fracture Toughness and Conversion Degree of Resin-Based Dental Composites after Modification with Liquid Rubber
by: Krzysztof Pałka, et al.
Published: (2020-06-01)

Osteogenic Enhancement of Zirconia-Toughened Alumina with Silicon Nitride and Bioglass<sup>®</sup>
by: Giuseppe Pezzotti, et al.
Published: (2019-10-01)

The influence of interlayer/epoxy adhesion on the mode-I and mode-II fracture response of carbon fibre/epoxy composites interleaved with thermoplastic veils
by: Dong Quan, et al.
Published: (2020-07-01)

Lithography-based manufacturing of advanced ceramics for orthopaedic applications: A comparative tribological study
by: A. Paterlini, et al.
Published: (2021-12-01)

A bicentric approach evaluating the combination of a hemispheric cup with a novel ceramic head in total hip arthroplasty
by: André Busch, et al.
Published: (2021-04-01)

Hardness and Indentation Fracture Toughness of Slip Cast Alumina and Alumina-Zirconia Ceramics
by: Irena Žmak, et al.
Published: (2019-12-01)

Refitting of Zirconia Toughening into Open-Cellular Alumina Foams by Infiltration with Zirconyl Nitrate
by: Ulf Betke, et al.
Published: (2019-06-01)

Characterization of Dielectric Relaxation Process by Impedance Spectroscopy for Polymers: Nitrile Butadiene Rubber and Ethylene Propylene Diene Monomer
by: Jae Kap Jung, et al.
Published: (2020-01-01)

Microstructure and mechanical properties of Cu/Al<sub>2</sub>O<sub>3</sub> composite prepared by metal injection molding after mechanical alloying
by: HE Yi-qiang, et al.
Published: (2019-03-01)

Thermal and Mechanical Properties of Ethylene Propylene Diene Monomer/Polyolefin Elastomer Blend
by: Chiang-Fen Nieh, et al.
Published: (2018)

Vulcanization Kinetics and Mechanical Properties of Ethylene Propylene Diene Monomer Thermal Insulation
by: Mohamad Irfan Fathurrohman, et al.
Published: (2015-07-01)

Effect of BNNTs/matrix interface tailoring on toughness and fracture morphology of hierarchical SiCf/SiC composites
by: Guangxiang Zhu, et al.
Published: (2019-12-01)

Influence of different surface treatments on the fracture toughness of a commercial ZTA dental ceramic
by: Flavio Teixeira da Silva, et al.
Published: (2007-03-01)

Nano Multilayer Structure Toughening of Hard Coatings-Method, Mechanism and Application
by: DU Jun, et al.
Published: (2017-08-01)

Investigation of Mechanical Properties of Magneto-Rheological Ethylene Propylene Diene Monomer and Natural Rubber Type Synthetic Rubbers for Both Isotropic and Anisotropic Situations
by: Uğur Mazlum, et al.
Published: (2015-12-01)

Investigation of Mechanical Properties of Magneto-Rheological Ethylene Propylene Diene Monomer and Natural Rubber Type Synthetic Rubbers for Both Isotropic and Anisotropic Situations
by: Recep Gümrük, et al.
Published: (2016-01-01)

Toughening of Epoxy Resin: The Effect of Water Jet Milling on Worn Tire Rubber Particles
by: Peter Tamas-Benyei, et al.
Published: (2019-03-01)

Alumina–MWCNT composites: microstructural characterization and mechanical properties
by: Nidhi Sharma, et al.
Published: (2019-01-01)

First time additively manufactured advanced ceramics by using two-photon polymerization for powder processing
by: Johanna C. Sänger, et al.
Published: (2020-11-01)

Mechanical Behavior of Toughened Epoxy Structural Adhesives for Impact Applications
by: Gamze S. Baş, et al.
Published: (2020-06-01)

Influence of composite structure design on the ablation performance of ethylene propylene diene monomer composites
by: Ren Jingwen, et al.
Published: (2021-02-01)

Cannot write session to /tmp/vufind_sessions/sess_qbmuq979taebqsnnutv1m42cf4