Optimization in the Stripping Process of CO<sub>2</sub> Gas Using Mixed Amines

The aim of this work was to explore the effects of variables on the heat of regeneration, the stripping efficiency, the stripping rate, the steam generation rate, and the stripping factor. The Taguchi method was used for the experimental design. The process variables were the CO<sub>2</sub&...

Full description

Bibliographic Details
Main Authors: Pao Chi Chen, Yan-Lin Lai
Format: Article
Language:English
Published: MDPI AG 2019-06-01
Series:Energies
Subjects:
Online Access:https://www.mdpi.com/1996-1073/12/11/2202
Description
Summary:The aim of this work was to explore the effects of variables on the heat of regeneration, the stripping efficiency, the stripping rate, the steam generation rate, and the stripping factor. The Taguchi method was used for the experimental design. The process variables were the CO<sub>2</sub> loading (A), the reboiler temperature (B), the solvent flow rate (C), and the concentration of the solvent (monoethanolamine (MEA) + 2-amino-2-methyl-1-propanol (AMP)) (D), which each had three levels. The stripping efficiency (E), stripping rate (<inline-formula> <math display="inline"> <semantics> <mrow> <msub> <mover accent="true"> <mi>m</mi> <mo>˙</mo> </mover> <mrow> <msub> <mi>CO</mi> <mn>2</mn> </msub> </mrow> </msub> </mrow> </semantics> </math> </inline-formula>), stripping factor (<i>&#946;</i>), and heat of regeneration (Q) were determined by the mass and energy balances under a steady-state condition. Using signal/noise (S/N) analysis, the sequence of importance of the parameters and the optimum conditions were obtained, and the optimum operating conditions were further validated. The results showed that E was in the range of 20.98&#8722;55.69%; <inline-formula> <math display="inline"> <semantics> <mrow> <msub> <mover accent="true"> <mi>m</mi> <mo>˙</mo> </mover> <mrow> <msub> <mi>CO</mi> <mn>2</mn> </msub> </mrow> </msub> </mrow> </semantics> </math> </inline-formula> was in the range of 5.57 &#215; 10<sup>&#8722;5</sup>&#8722;4.03 &#215; 10<sup>&#8722;4</sup> kg/s, and Q was in the range of 5.52&#8722;18.94 GJ/t. In addition, the S/N ratio analysis showed that the parameter sequence of importance as a whole was A &gt; B &gt; D &gt; C, while the optimum conditions were A3B3C1D1, A3B3C3D2, and A3B2C2D2, for E, <inline-formula> <math display="inline"> <semantics> <mrow> <msub> <mover accent="true"> <mi>m</mi> <mo>˙</mo> </mover> <mrow> <msub> <mi>CO</mi> <mn>2</mn> </msub> </mrow> </msub> </mrow> </semantics> </math> </inline-formula>, and Q, respectively. Verifications were also performed and were found to satisfy the optimum conditions. Finally, the correlation equations that were obtained were discussed and an operating policy was discovered.
ISSN:1996-1073