Studying of properties and microstructure of 30 CrMnV9 steel on wear resistance
The properties and microstructure of 30 CrMoV9 steel after its treatment with ferronickel and ferromanganese with the aim of increasing the content of nickel and manganese in steel were studied. After the trial smelting, the samples were tested in four parameters: hardness, ultimate stress limit, we...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Croatian Metallurgical Society
2019-01-01
|
| Series: | Metalurgija |
| Subjects: | |
| Online Access: | http://hrcak.srce.hr/file/318857 |
| Summary: | The properties and microstructure of 30 CrMoV9 steel after its treatment with ferronickel and ferromanganese with the aim of increasing the content of nickel and manganese in steel were studied. After the trial smelting, the samples were tested in four parameters: hardness, ultimate stress limit, wear resistance, and toughness. Experimental studies have shown that changing the composition of steel with increasing the nickel content up to 0,5 – 0,7 % and manganese up to 1,5 – 1,8 % leads to increasing strength, hardness and wear resistance of steel with slight decreasing its toughness. |
|---|---|
| ISSN: | 0543-5846 1334-2576 |