| Summary: | Lignite is an important natural resource with the application potential covering present and future energy systems, including conventional power plants and gasification systems. Lignite is also a valuable precursor for the production of porous materials of tailored properties for various environmental applications, including the removal of contaminants from gaseous or liquid media. Although the lignite-based activated carbons are commercially available, various approaches to produce carbon materials of desired properties are still being reported, covering temperature, partial oxidation and chemical activation effects on surface and structural properties of these materials. Limited data is, however, available on the effects of pressure as the activation parameter in shaping the porous structure of carbonaceous materials, in particularly lignite-derived. In the study presented the combined effect of carbon dioxide activation and pressure in the range of 1–3 MPa at the temperature of 800 °C on the development of porous structure of lignite chars was reported. The study was also focused on poor-quality resources valorization by using a relatively low calorific value, low volatiles and high ash content lignite as a carbon material precursor. The results showed that the application of pressure in carbon dioxide-activation process at 800 °C results in generation of chars of comparable or higher specific surface area than the carbon materials previously received with demineralization and carbon dioxide activation of lignite. They also proved that the combined pressure and carbon dioxide activation may be effectively applied in conversion of low quality lignite into valuable porous materials.
|
|---|
