Modeling of additive height and numerical analysis of cooling parameters for aero blade remanufacturing
<p>Additive remanufacturing height and matching cooling parameters are the key factors affecting blade repair quality. First, the mathematical model of the single additive remanufacturing repair height and wire-feeding speed was established, the solution method was proposed and the numerical s...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Copernicus Publications
2021-08-01
|
| Series: | Mechanical Sciences |
| Online Access: | https://ms.copernicus.org/articles/12/803/2021/ms-12-803-2021.pdf |
| Summary: | <p>Additive remanufacturing height and matching cooling parameters are the key factors affecting blade repair quality. First, the mathematical model of the single additive remanufacturing repair height and wire-feeding speed was established, the solution method was proposed and the numerical solution was obtained, and the validity of the model was verified by experiments. Then, based on the calculation results of a single additive remanufacturing repair, the geometric morphology of the cross section under double additive remanufacturing repair was analyzed, and the mathematical
model was established. Second, based on the optimal parameters obtained by
numerical analysis and the mathematical model, the fluid structure coupling
heat transfer model of “blade fixture” for base channel cooling was
established. The cooling effect of the typical section under different
initial temperatures and different flow rates was calculated, and the
coupled heat transfer in the process of blade remanufacturing was explained
by the mechanism. Third, through the comparative analysis of the cooling effect, optimal cooling parameters of double additive remanufacturing repair were obtained, and the model of coupled heat flow was verified by experiment. The results showed that the mathematical model of additive remanufacturing height is effective for studying the thermal cycle and cooling effect of welding, and the cooling parameters obtained by numerical analysis can effectively guarantee the quality of double additive remanufacturing of blade repair.</p> |
|---|---|
| ISSN: | 2191-9151 2191-916X |