Design and Construction of a Laboratory-Scale Direct-Current Electric Arc Furnace for Metallurgical and High-Titanium Slag Smelting Studies

Design and Construction of a Laboratory-Scale Direct-Current Electric Arc Furnace for Metallurgical and High-Titanium Slag Smelting Studies

A novel direct-current electric arc furnace (DC-EAF) was designed and constructed in this study for experimentally investigating high-titanium slag smelting, with an emphasis on addressing the issues of incomplete separation of metal and slag as well as poor insulation effects. The mechanical compon...

Full description

Bibliographic Details
Main Authors:	Botao Xue, Lingzhi Yang, Yufeng Guo, Feng Chen, Shuai Wang, Fuqiang Zheng, Zeshi Yang
Format:	Article
Language:	English
Published:	MDPI AG 2021-04-01
Series:	Metals
Subjects:	DC electric arc furnace high-titanium slag mechanical design PLC data collection software development
Online Access:	https://www.mdpi.com/2075-4701/11/5/732

Similar Items

Comparing Properties of Concrete Containing Electric Arc Furnace Slag and Granulated Blast Furnace Slag
by: Jin-Young Lee, et al.
Published: (2019-04-01)

Investigations of Electric Arc Furnace Slag Filters: Phosphorus Treatment Performance, Removal Mechanisms and Material Reuse
by: Bird, Simon
Published: (2009)

Development of High Resistance Hot Mix Asphalt with Electric Arc Furnace Slag, Ladle Furnace Slag, and Cellulose Fibers from the Papermaking Industry
by: Juan María Terrones-Saeta, et al.
Published: (2021-01-01)

Carbothermic Reduction of Titanium-Bearing Blast Furnace Slag
by: Zhen Yu-Lan, et al.
Published: (2016-03-01)

Fluoride Leaching of Titanium from Ti-Bearing Electric Furnace Slag in [NH<sub>4</sub><sup>+</sup>]-[F<sup>−</sup>] Solution
by: Fuqiang Zheng, et al.
Published: (2021-07-01)

MANAGEMENT OF THE SLAG AJUSTMENT IN ARC FURNACES
by: S. V. Korneev, et al.
Published: (2018-01-01)

Evaluation of the Use of Electric Arc Furnace Slag and Ladle Furnace Slag in Stone Mastic Asphalt Mixes with Discarded Cellulose Fibers from the Papermaking Industry
by: Juan María Terrones-Saeta, et al.
Published: (2020-11-01)

Impact of electric arc furnace slag on geopolymer composites exposed to sulphate solution
by: Hisham Mustafa Mohamed khater
Published: (2017-08-01)

A Review of the Influence of Steel Furnace Slag Type on the Properties of Cementitious Composites
by: Alexander S. Brand, et al.
Published: (2020-11-01)

Hydration characteristics of Portland cement – Electric arc furnace slag blends
by: E.E. Hekal, et al.
Published: (2013-08-01)

The Potential of Ladle Slag and Electric Arc Furnace Slag use in Synthesizing Alkali Activated Materials; the Influence of Curing on Mechanical Properties
by: Mark Češnovar, et al.
Published: (2019-04-01)

Removal of Methylene Blue from Aqueous Solution by Using Electrical Arc Furnace (EAF) Slag
by: Suhanna Natalya Mohd Suhaimy, et al.
Published: (2019-12-01)

Study of the instability of black slags from electric arc furnace steel industry
by: M. Frías, et al.
Published: (2002-09-01)

Evaluation of recycled MgO-C bricks and dead-burned dolomite fines in setting slag foaming in the electric arc furnace
by: Thiago da Costa Avelar, et al.

Visualization of Slag Data for Efficient Monitoring and Improvement of Steelmaking Slag Operation in Electric Arc Furnaces, with a Focus on MgO Saturation
by: Marcus Kirschen
Published: (2021-12-01)

Numerical Simulation of Bottom-Blowing Stirring in Different Smelting Stages of Electric Arc Furnace Steelmaking
by: Hang Hu, et al.
Published: (2021-05-01)

High Performance Self-Compacting Concrete with Electric Arc Furnace Slag Aggregate and Cupola Slag Powder
by: Israel Sosa, et al.
Published: (2020-01-01)

Evaluation on the Microstructure and Durability of High-Strength Concrete Containing Electric Arc Furnace Oxidizing Slag
by: Tian-Feng Yuan, et al.
Published: (2021-03-01)

Development of Slurry Surfacing with Electric Arc Furnace Slag for Pavements with Friction Problems
by: Juan María Terrones-Saeta, et al.
Published: (2020-10-01)

The Effect of Titanium Carbonitride on the Viscosity of High-Titanium-Type Blast Furnace Slag
by: Hongen Xie, et al.
Published: (2019-03-01)

Effects of Basicity and MgO in Slag on the Behaviors of Smelting Vanadium Titanomagnetite in the Direct Reduction-Electric Furnace Process
by: Tao Jiang, et al.
Published: (2016-05-01)

Phase Equilibrium Diagram for Electric Arc Furnace Slag Optimization in High Alloyed Chromium Stainless Steelmaking
by: Marcus Kirschen, et al.
Published: (2020-06-01)

Mechanical and Durability Properties of Concrete with Coarse Recycled Aggregate Produced with Electric Arc Furnace Slag Concrete
by: Pablo Tamayo, et al.
Published: (2019-12-01)

Sulphated Electric Arc Furnace Slag Asfenton-Like Catalyst for Degradation of Reactive Black 5
by: Abdullah M.M.A.B, et al.
Published: (2018)

Mechanical and Durability Properties of Mortars Incorporating Red Mud, Ground Granulated Blast Furnace Slag, and Electric Arc Furnace Dust
by: Javad Sabzi, et al.
Published: (2021-04-01)

Recovery of iron from electric arc furnace slag: Effect of heating temperature and time
by: Abdullah M.M.A.-B, et al.
Published: (2019)

Pragmatic analysis of the electric submerged arc furnace continuum
by: K. Karalis, et al.
Published: (2017-01-01)

Iron loss in high-power arc steelmaking furnaces
by: V. P. Karasyov, et al.
Published: (2016-07-01)

Leaching Behaviors of Impurities in Titanium-Bearing Electric Furnace Slag in Sulfuric Acid
by: Wenlin Nie, et al.
Published: (2020-01-01)

Slag-foaming phenomenon originating from reaction of titanium-bearing blast furnace slag: Continuous monitoring of foaming height and calibration
by: Junyi Xiang, et al.
Published: (2021-03-01)

Production of concretes using slag aggregates: Contribution of increasing the durability and sustainability of constructions
by: Alexandros Chatzopoulos, et al.
Published: (2021-12-01)

Possibilities for the utilization of metallurgical slag in the conditions of the Polish economy
by: Z. Skuza, et al.
Published: (2009-04-01)

Influence of Mechanically Activated Electric Arc Furnace Slag on Compressive Strength of Mortars Incorporating Curing Moisture and Temperature Effects
by: Muhammad Nasir Amin, et al.
Published: (2017-07-01)

A Feasibility Study on the Application of Basic Oxygen Furnace (BOF) Steel Slag for Railway Ballast Material
by: Taehoon Koh, et al.
Published: (2018-01-01)

Evaluation of electric arc furnace slag high strength shielding concrete on exposure to gamma 662 KeV
by: Ali G. Hassan, et al.
Published: (2020-12-01)

Physico-chemical characteristics of blended cement pastes containing electric arc furnace slag with and without silica fume
by: M.S. Amin, et al.
Published: (2015-12-01)

The oxidation and reduction of chromium of stainless steels in an eletric arc furnace
by: B. Arh, et al.
Published: (2011-07-01)

Interactions between freeze lining and slag bath in ilmenite smelting
by: Zietsman, Johannes Hendrik
Published: (2013)

Development of Porous Asphalt with Bitumen Emulsion, Electric arc Furnace Slag and Cellulose Fibers for Medium Traffic Roads
by: Juan María Terrones-Saeta, et al.
Published: (2020-10-01)

Determination of the Chemical, Physical and Mechanical Characteristics of Electric Arc Furnace Slags and Environmental Evaluation of the Process for Their Utilization as an Aggregate in Bituminous Mixtures
by: Juan María Terrones-Saeta, et al.
Published: (2021-02-01)