Transition Frequencies and Negative Resistance of Inductively Terminated CMOS Buffer Cell and Application in MMW LC VCO
This paper investigates the transition frequencies (𝑓trans) of an inductively terminated CMOS source follower buffer for negative resistance behavior at which the effective shunt resistance looking into the source of the buffer cell changes sign. Possible limiting frequencies of oscillation are dete...
Main Author: | |
---|---|
Format: | Article |
Language: | English |
Published: |
Hindawi Limited
2010-01-01
|
Series: | Active and Passive Electronic Components |
Online Access: | http://dx.doi.org/10.1155/2010/542406 |
id |
doaj-a6a82cdb44804994a351e25e9996793d |
---|---|
record_format |
Article |
spelling |
doaj-a6a82cdb44804994a351e25e9996793d2020-11-24T22:39:01ZengHindawi LimitedActive and Passive Electronic Components0882-75161563-50312010-01-01201010.1155/2010/542406542406Transition Frequencies and Negative Resistance of Inductively Terminated CMOS Buffer Cell and Application in MMW LC VCOS. M. Rezaul Hasan0Center for Research in Analog & VLSI Microsystem dEsign (CRAVE), School of Engineering and Advanced Technology (SEAT), Massey University, Albany, Auckland 0632, New ZealandThis paper investigates the transition frequencies (𝑓trans) of an inductively terminated CMOS source follower buffer for negative resistance behavior at which the effective shunt resistance looking into the source of the buffer cell changes sign. Possible limiting frequencies of oscillation are determined based on resonators formed by a grounded gate inductor and a parasitic capacitance at the gate of the negative resistance buffer cell. The range of frequencies of oscillation of this negative resistance buffer cell for variations in the different circuit parameters/elements is explored. Following this, a millimeter wave (MMW) oscillator is simulated using the IBM 130 nm CMOS process technology which can operate at 70 GHz. High-frequency MOSFET model was used for these simulations. The cell had an extremely low power dissipation of under 3 mW. Extensive Monte Carlo simulations were carried out for manufacturability analysis considering up to 50% variation in process and geometrical parameters, supply voltage, and ambient temperature. Noise analysis and a simulated estimate of the phase noise in an MMW LC VCO application is also reported.http://dx.doi.org/10.1155/2010/542406 |
collection |
DOAJ |
language |
English |
format |
Article |
sources |
DOAJ |
author |
S. M. Rezaul Hasan |
spellingShingle |
S. M. Rezaul Hasan Transition Frequencies and Negative Resistance of Inductively Terminated CMOS Buffer Cell and Application in MMW LC VCO Active and Passive Electronic Components |
author_facet |
S. M. Rezaul Hasan |
author_sort |
S. M. Rezaul Hasan |
title |
Transition Frequencies and Negative Resistance of Inductively Terminated CMOS Buffer Cell and Application in MMW LC VCO |
title_short |
Transition Frequencies and Negative Resistance of Inductively Terminated CMOS Buffer Cell and Application in MMW LC VCO |
title_full |
Transition Frequencies and Negative Resistance of Inductively Terminated CMOS Buffer Cell and Application in MMW LC VCO |
title_fullStr |
Transition Frequencies and Negative Resistance of Inductively Terminated CMOS Buffer Cell and Application in MMW LC VCO |
title_full_unstemmed |
Transition Frequencies and Negative Resistance of Inductively Terminated CMOS Buffer Cell and Application in MMW LC VCO |
title_sort |
transition frequencies and negative resistance of inductively terminated cmos buffer cell and application in mmw lc vco |
publisher |
Hindawi Limited |
series |
Active and Passive Electronic Components |
issn |
0882-7516 1563-5031 |
publishDate |
2010-01-01 |
description |
This paper investigates the transition frequencies (𝑓trans) of an
inductively terminated CMOS source follower buffer for negative
resistance behavior at which the effective shunt resistance
looking into the source of the buffer cell changes sign. Possible limiting frequencies of oscillation are determined based on resonators formed by a grounded gate inductor and a parasitic capacitance at the gate of the negative resistance buffer cell. The range of frequencies of oscillation of this negative resistance buffer cell for variations in the different circuit parameters/elements is explored. Following this, a millimeter wave (MMW) oscillator is simulated using the IBM 130 nm CMOS process technology which can operate at 70 GHz. High-frequency MOSFET model was used for these simulations. The cell had an extremely low power dissipation of under 3 mW. Extensive Monte Carlo simulations were carried out for manufacturability analysis considering up to 50% variation in process and geometrical parameters, supply voltage, and ambient temperature. Noise analysis and a simulated estimate of the phase noise in an MMW LC VCO application is also reported. |
url |
http://dx.doi.org/10.1155/2010/542406 |
work_keys_str_mv |
AT smrezaulhasan transitionfrequenciesandnegativeresistanceofinductivelyterminatedcmosbuffercellandapplicationinmmwlcvco |
_version_ |
1725710588882976768 |