Creation of modified friction surfaces
The article provides information on the creation of modified friction surfaces. The results of the analysis of the applied antifriction film coatings are presented. One of the main problems in the application of thin film coatings is the lack of technological modes recommended by the manufacturer. T...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
EDP Sciences
2021-01-01
|
| Series: | MATEC Web of Conferences |
| Online Access: | https://www.matec-conferences.org/articles/matecconf/pdf/2021/10/matecconf_itmts2021_00016.pdf |
| Summary: | The article provides information on the creation of modified friction surfaces. The results of the analysis of the applied antifriction film coatings are presented. One of the main problems in the application of thin film coatings is the lack of technological modes recommended by the manufacturer. The composition of the film anti-friction coating is described. The results of experimental studies of the deposition of thin film coatings are presented. Selected pneumatic spray gun for depositing of thin film coating. A series of experiments were carried out to identify the technological modes of applying thin film coatings. A qualitative and quantitative analysis of the results of applying thin film coatings has been carried out. A functional diagram of the application of an antifriction film coating is proposed. On the basis of the conclusions made, recommendations are given on the technological modes of applying thin film antifriction coatings on the modified friction surface. |
|---|---|
| ISSN: | 2261-236X |