Assessment of geometrical characteristics of dental endodontic micro-instruments utilizing X-ray micro computed tomography

Assessment of geometrical characteristics of dental endodontic micro-instruments utilizing X-ray micro computed tomography

Show other versions (1)

OBJECTIVE: The aim of this study was to quantify the surface area, volume and specific surface area of endodontic files employing quantitative X-ray micro computed tomography (mXCT). MATERIAL AND METHODS: Three sets (six files each) of the Flex-Master Ni-Ti system (Nº 20, 25 and 30, taper .04) were...

Full description

Bibliographic Details
Main Authors:	Youssef S. Al Jabbari, Peter Tsakiridis, George Eliades, Solaiman M. Al-Hadlaq, Spiros Zinelis
Format:	Article
Language:	English
Published:	University of São Paulo 2012-12-01
Series:	Journal of Applied Oral Science
Subjects:	X-ray microtomography Nickel Titanium Dental instruments
Online Access:	http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1678-77572012000600011&lng=en&tlng=en

Similar Items

Assessment of geometrical characteristics of dental endodontic micro-instruments utilizing X-ray micro computed tomography
by: Youssef S. Al Jabbari, et al.
Published: (2012-12-01)

A New Device to Test the Bending Resistance of Mechanical Endodontic Instruments
by: Gabriele Miccoli, et al.
Published: (2020-10-01)

Fatigue resistance of endodontic instruments manufactured in NiTi CM Wire and in conventional NiTi alloy with eletrochemical treatment
by: Inês de Fátima de Azevedo Jacinto INOJOSA, et al.
Published: (2018-06-01)

Experimental study of factors affecting the failure of the cyclical nature of rotary endodontic instruments
by: V. G. Deviatnikova, et al.
Published: (2020-04-01)

Changes in the crystal lattice of nickel-titanium endodontic instruments as a result of autoclaving
by: Z. S. Khabadze, et al.
Published: (2020-03-01)

Comparison of the shaping abilities of three nickel–titanium instrumentation systems using micro-computed tomography
by: Jin Yi Baek, et al.
Published: (2014-06-01)

Dentinal Defects in Endodontically Treated Teeth using NiTi Rotary vs Reciprocating Endodontic Instruments-A Systematic Review
by: Gaurav Lal Aidasani, et al.
Published: (2017-12-01)

Assessment of the apical part of the roots after their instrumentation by different endodontic systems
by: A. V. Mitronin, et al.
Published: (2020-03-01)

Ultrastructural analysis of the surface of endodontic instruments after immersion in irrigating solutions
by: Popović Jelena, et al.
Published: (2015-01-01)

Validation of micro-computed tomography for occlusal caries detection: an in vitro study
by: Gökhan ÖZKAN, et al.
Published: (2015-01-01)

Geometric and dimensional characteristics of simulated curved canals prepared with proTaper instruments
by: Renata de Castro Martins, et al.
Published: (2010-02-01)

Role of the Flat-Designed Surface in Improving the Cyclic Fatigue Resistance of Endodontic NiTi Rotary Instruments
by: Gianluca Gambarini, et al.
Published: (2019-08-01)

Fracture resistance of endodontically treated teeth after instrumentation with different nickel titanium systems
by: Sameer Ahmed Khan, et al.
Published: (2020-01-01)

Surface and cross-sectional characterization of titanium-nitride coated nickel–titanium endodontic files
by: Youssef S. Al Jabbari, et al.
Published: (2016-03-01)

Comparison of automatic and visual methods used for image segmentation in Endodontics: a microCT study
by: Polyane Mazucatto Queiroz, et al.

Analysis of the Morpho-Geometrical Changes of the Root Canal System Produced by TF Adaptive vs. BioRace: A Micro-Computed Tomography Study
by: Loai Alsofi, et al.
Published: (2021-01-01)

A finite element study on the mechanical behavior of reciprocating endodontic files
by: Mohamed I. El-Anwar, et al.
Published: (2015-03-01)

Selective Desintegration and Concentration: Theory and Practice
by: Aleksandrova Tatyana, et al.
Published: (2018-01-01)

Removing Fractured Endodontic NiTi Instruments with a Tube Technique: Influence of Pre-Treatment with Various Agents on Adhesive Forces In Vitro
by: Sebastian Bürklein, et al.
Published: (2019-12-01)

Ultrastructural analysis of the root canal walls after preparation with two rotary nickel-titanium endodontic instruments
by: Claudio Poggio, et al.
Published: (2014-01-01)

The examination of sensitivity to corrosion of nickel-titanium and stainless steel endodontic instruments in root canal irrigating solutions
by: Popović Jelena, et al.
Published: (2016-01-01)

A new method for assessment of nickel-titanium endodontic instrument surface roughness using field emission scanning electronic microscope
by: Khoa Van Pham, et al.
Published: (2020-08-01)

Root canal preparation using micro-computed tomography analysis: a literature review
by: Manoel Damião de Sousa-Neto, et al.
Published: (2018-10-01)

Quantifying Electromigration Processes in Sn-0.7Cu Solder with Lab-Scale X-Ray Computed Micro-Tomography
Published: (2015)

Assessing apical transportation in curved canals: comparison between cross-sections and micro-computed tomography
by: Laila Gonzales Freire, et al.
Published: (2012-06-01)

CLINICAL AND EXPERIMENTAL STUDY OF ROTARY NICKEL TITANIUM ENDODONTIC INSTRUMENTS
by: A. A. Adamchik, et al.
Published: (2016-08-01)

A comparative assessment of apical debris extrusion by various glide path establishing endodontic instruments: An in vitro study
by: V P Anshida, et al.
Published: (2021-01-01)

Testing Cyclic Fatigue Resistance of Nickel Titanium Rotary Endodontic Instruments: A Validation Study for a Minimum Quality Criterion in a Standardized Environment
by: Ove A. Peters, et al.
Published: (2021-09-01)

Debris extrusion by glide-path establishing endodontic instruments with different geometries
by: Jung-Hong Ha, et al.
Published: (2016-06-01)

Effect of sodium hypochlorite on conventional and heat-treated nickel-titanium endodontic rotary instruments – An in vitro study
by: Jack Han-Hsing Lin, et al.
Published: (2021-03-01)

The advantage using Ni - Ti rotary instruments as the smoothness of one-third apical root canal wall
by: Badi Soerachman, et al.
Published: (2014-11-01)

Micro-computed tomography for natural history specimens: a handbook of best practice protocols
by: Kleoniki Keklikoglou, et al.
Published: (2019-04-01)

Incidence of Deformation and Fracture of Twisted File Adaptive Instruments after Repeated Clinical Use
by: Gianluca Gambarini, et al.
Published: (2017-01-01)

High Resolution X-ray Computed Tomography: An Emerging Tool for Small Animal Cancer Research
by: Michael J. Paulus, et al.
Published: (2000-01-01)

Fracture of rotary nickel titanium instruments
by: Rajendra Kumar Tewari, et al.
Published: (2017-01-01)

Cyclic Fatigue of Dental NiTi Instruments after Plasma Nitriding
by: Michal Bumbalek, et al.
Published: (2021-04-01)

Influence of cross-section and number of use in cyclic fatigue resistance of rotary instruments
by: Luís César Brisighello, et al.
Published: (2019-09-01)

Modeling of the Tension and Compression Behavior of Sintered 316L Using Micro Computed Tomography
by: Doroszko Michał, et al.
Published: (2015-06-01)

The Effects of Two Root Canal Irrigants and Different Instruments on Dentin Microhardness ( In Vitro Study)
by: Wiaam MO AL-Ashou
Published: (2011-04-01)

Effect of sterilization on cyclic fatigue resistance of Proflexendo endodontic rotary files
by: Emad O Alshwaimi
Published: (2019-01-01)