Plastic deformation of directionally solidified ingots of binary and some ternary MoSi2/Mo5Si3 eutectic composites

• Main Authors: Hirotaka Matsunoshita, Yuta Sasai, Kosuke Fujiwara, Kyosuke Kishida, Haruyuki Inui
• Format: Article
• Language: English
• Published: Taylor & Francis Group 2016-01-01
• Series: Science and Technology of Advanced Materials
• Subjects: transition-metal silicides; microstructure; mechanical properties; high-temperature deformation
• Online Access: http://dx.doi.org/10.1080/14686996.2016.1218248
• ISSN: 1468-6996; 1878-5514

The high-temperature mechanical properties of directionally solidified (DS) ingots of binary and some ternary MoSi2/Mo5Si3 eutectic composites with a script lamellar structure have been investigated as a function of loading axis orientation and growth rate in a temperature range from 900 to 1500°C. These DS ingots are plastically deformed above 1000 and 1100 °C when the compression axis orientations are parallel to [1$ \overline1 $0]MoSi2 (nearly parallel to the growth direction) and [001]MoSi2, respectively. [1$ \overline1 $0]MoSi2-oriented DS eutectic composites are strengthened so much by forming a script lamellar microstructure and they exhibit yield stress values several times higher than those of MoSi2 single crystals of the corresponding orientation. The yield stress values increase with the decrease in the average thickness of MoSi2 phase in the script lamellar structure, indicating that microstructure refinement is effective in obtaining better high-temperature strength of these DS eutectic composites. Among the four ternary alloying elements tested (V, Nb, Ta and W), Ta is found to be the most effective in obtaining higher yield strength at 1400 °C.