Directional Response of Randomly Dispersed Carbon Nanotube Strain Sensors

• Main Authors: Alfredo Güemes, Angel Renato Pozo Morales, Antonio Fernandez-Lopez, Xoan Xose F. Sanchez-Romate, Maria Sanchez, Alejandro Ureña
• Format: Article
• Language: English
• Published: MDPI AG 2020-05-01
• Series: Sensors
• Subjects: strain monitoring; bonded joints; multidirectional sensors; doped resins
• Online Access: https://www.mdpi.com/1424-8220/20/10/2980

Tests on a double lap bonded joint, with transverse strips of randomly oriented carbon nanotubes (CNT) sprayed onto an epoxy adhesive film, showed a positive increment in electrical resistance under tensile load, even though the transverse strains were negative. Other experiments included in this work involved placing longitudinal and transversal CNT sensors in a tensile loaded aluminum plate, and, as reported by other authors, the results confirm that the resistance change is not only dependent on the strains oriented with the electrode line, while the other strain components also influence the response. This behavior is quite different to that of conventional strain gages which have a near zero sensitivity to strains not aligned to the sensor direction. The dependence of the electrical response on all the strain components makes it quite difficult, possibly unfeasible, to experimentally determine the individual strain components with this kind of sensors; however, the manufacturing of aligned CNT sensors could deal with this issue.