Simulation-Based Generation of Representative and Valid Training Data for Acoustic Resonance Testing

• Main Authors: Matthias Heinrich, Ute Rabe, Bernd Valeske
• Format: Article
• Language: English
• Published: MDPI AG 2020-09-01
• Series: Applied Sciences
• Subjects: acoustic resonance testing; resonance inspection; eigenfrequency analysis; serial inspection; nondestructive testing; finite element eigenfrequency calculation
• Online Access: https://www.mdpi.com/2076-3417/10/17/6059

Analyzing eigenfrequencies of serial parts by acoustic resonance testing enables an efficient nondestructive assessment of component quality or structural state. Usually, each application is based on experimentally acquired training data, which represent the typical natural vibration behavior of the component type to be inspected. From the training data, suitable test characteristics are identified according to the inspection objective. The experimental collection of training data, which involves selecting and characterizing numerous representing parts, is often associated with a great amount of effort. Instead, this work focuses on a simulation-based generation of synthetic training data. Within an application example, the eigenfrequencies of a set of virtual parts were calculated with FEM as a function of geometry. The resulting simulation values were adapted using empirical correction factors, which were derived from both calculated and measured eigenfrequencies of machine-made reference parts. The simulation-based data were finally used to form linear regression models within a training procedure. These models enabled the precise estimation of geometric dimensions of further machine-made parts using their measured eigenfrequencies as input data. The novel approach, which requires the experimental characterization of only a few real parts, can thus significantly reduce the effort associated with efficient and reliable acoustic resonance testing.