Numerical analysis of the states of stress in the steel-titanium bimetal during cyclic bending
This paper presents the results of experimental study into steel-titanium bimetal obtained by means of explosive welding, which involved the development of fatigue cracks. A particular emphasis in the report was placed on the analysis of development of the crack in the area in which the two metals a...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
EDP Sciences
2017-01-01
|
| Series: | E3S Web of Conferences |
| Online Access: | https://doi.org/10.1051/e3sconf/20171903022 |
| Summary: | This paper presents the results of experimental study into steel-titanium bimetal obtained by means of explosive welding, which involved the development of fatigue cracks. A particular emphasis in the report was placed on the analysis of development of the crack in the area in which the two metals are joined. The study was accompanied by a numerical analysis of the distribution of stresses in the weld area in terms of the elastic-plastic characteristics. The numerical analysis performed in terms of the elastic-plastic characteristics demonstrated that the titanium layer is completely plasticized as a result of the acting loading, when the crack is still located in the steel part of the examined plater. |
|---|---|
| ISSN: | 2267-1242 |