Analysis of material non-linearity of steel girders subjected to patch loading
The paper presents an analysis of behaviour of plate girders (welded steel I girders) under patch loading. Concentrated or uniformly distributed loading on a short length of the flange, and in the plane of web is known as patch loading. Behaviour of the girder in non-linear area, as well as the ulti...
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek
2017-01-01
|
| Series: | Tehnički Vjesnik |
| Subjects: | |
| Online Access: | https://hrcak.srce.hr/file/280329 |
| Summary: | The paper presents an analysis of behaviour of plate girders (welded steel I girders) under patch loading. Concentrated or uniformly distributed loading on a short length of the flange, and in the plane of web is known as patch loading. Behaviour of the girder in non-linear area, as well as the ultimate load capacity, which is manifested by buckling in the loaded zone were analysed. Girder modelling was performed in ANSYS Workbench 15 software [1]. In accordance with the standing regulations EN 1993-1-5 [2] and BSK 07 [3], in the course of the numerical analysis, six different material models were employed. The obtained results were compared to the experimentally obtained results. |
|---|---|
| ISSN: | 1330-3651 1848-6339 |