Pre-Peak Deformation and Damage Features of Sandstone under Cyclic Loading

• Main Authors: Chengjie Li, Peijie Lou, Shuling Liang, Mingming Feng, Bin Pan
• Format: Article
• Language: English
• Published: Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek 2020-01-01
• Series: Tehnički Vjesnik
• Subjects: accumulation energy; damage variable; pre-peak phase; strain hardening
• Online Access: https://hrcak.srce.hr/file/343932
• ISSN: 1330-3651; 1848-6339

In this paper, several sandstone specimens are prepared and subjected to uniaxial compression and cyclic loading. For each specimen, the loading segment of the stress-strain curve was fitted, and the peak slope of this segment was taken as the elastic modulus of the specimen in that cycle. It is learned that, under cyclic loading, the elastic modulus of each specimen increased with the growing number of load cycles, and tended to be stable; meanwhile, strain hardening was observed on all specimens. Moreover, the specimens are similar in corresponding stress, although varied in corresponding strain. In the same cycle, the tangent modulus of the loading phase was smaller than that of the unloading phase under the same stress. Finally, the damage variables of sandstone specimens under cyclic loading were defined from the angle of energy, revealing that the damage variables had logarithmic growth with the load cycles in the later stage.