Fracture of Thin-Walled Polyoxymethylene Bulk Specimens in Modes I and III

Fracture of Thin-Walled Polyoxymethylene Bulk Specimens in Modes I and III

Thin-walled polymeric components are used in many applications. Hence, knowledge about their fracture behavior in bulk is beneficial in practice. Within this study, the double cantilever beam (DCB) and out-of-plane double cantilever beam (ODCB) tests are enhanced to enable the testing of such bulk s...

Full description

Bibliographic Details
Main Authors:	Peer Schrader, Anja Gosch, Michael Berer, Stephan Marzi
Format:	Article
Language:	English
Published:	MDPI AG 2020-11-01
Series:	Materials
Subjects:	polyoxymethylene fracture mechanical testing polymers quasi-static loads experimental procedures J-integral
Online Access:	https://www.mdpi.com/1996-1944/13/22/5096

Similar Items

The effect of branch density polyoxymethylene copolymers
by: Ilg, Andrea Diane
Published: (2010)

Physical and mechanical characterization of oriented polyoxymethylene produced by die-drawing and hydrostatic extrusion
by: Ward, Ian M., et al.
Published: (2009)

DEVELOPMENT OF A MODEL OF THE DEGRADATION OF THE MECHANICAL PROPERTIES OF POLYOXYMETHYLENE (POM) IN THE PRESENCE OF BIODIESEL
by: Linero Jiménez, Adriano
Published: (2014)

Effect of flexible fuels on mechanical properties of reinforced polyoxymethylenes (POM)
by: M. Gómez-Mares, et al.
Published: (2014-08-01)

Investigation on the Crystallization Behaviors of Polyoxymethylene with a Small Amount of Ionic Liquid
by: Qi Jiao, et al.
Published: (2019-02-01)

Optimization of Mechanical Properties for Polyoxymethylene/Glass Fiber/Polytetrafluoroethylene Composites Using Response Surface Methodology
by: Jasbir Singh Kunnan Singh, et al.
Published: (2018-03-01)

Modeling of the Kinetics of Polyoxymethylene Decomposition under Oxidative and Non-Oxidative Conditions
by: Tomasz M. Majka, et al.
Published: (2021-04-01)

Inelastic Behavior of Polyoxymethylene for Wide Strain Rate and Temperature Ranges: Constitutive Modeling and Identification
by: Yevgeniya Filanova, et al.
Published: (2021-07-01)

Combustion Study of Polyoxymethylene Dimethyl Ethers and Diesel Blend Fuels on an Optical Engine
by: Jingjing He, et al.
Published: (2021-07-01)

Enhancement of the Laser Transmission Weldability between Polyethylene and Polyoxymethylene by Plasma Surface Treatment
by: Huixia Liu, et al.
Published: (2017-12-01)

Influence of the Melt Flow Rate on the Mechanical Properties of Polyoxymethylene (POM)
by: Faust, Karsten, et al.
Published: (2017)

In-situ observation of nucleated polymer crystallization in polyoxymethylene sandwich composites
by: Miroslav eSlouf, et al.
Published: (2015-03-01)

Etude de la durabilité de pièces thermoplastiques. Application au polyoxyméthylène.
by: Bastard, Myriam
Published: (2006)

Effects of polyoxymethylene dimethyl ethers on the solubility of ethanol/diesel and hydrous ethanol/diesel fuel blends
by: Chao Jin, et al.
Published: (2019-12-01)

Influence of Dielectric Barrier Discharge Treatment on Surface Structure of Polyoxymethylene Fiber and Interfacial Interaction with Cement
by: Wei Zhang, et al.
Published: (2018-10-01)

Effect of Polyhedral Oligomeric Silsesquioxane on the Melting, Structure, and Mechanical Behavior of Polyoxymethylene
by: Dorota Czarnecka-Komorowska, et al.
Published: (2018-02-01)

Development of Polyoxymethylene/Polylactide Blends for a Potentially Biodegradable Material: Crystallization Kinetics, Lifespan Prediction, and Enzymatic Degradation Behavior
by: Jianhua Li, et al.
Published: (2019-09-01)

Dataset on flue gas composition during pyrolysis of polyoxymethylene in a fluidised bed with the possibility of incorporating CO2
by: Witold Żukowski, et al.
Published: (2020-08-01)

Improving the Toughness and Thermal Resistance of Polyoxymethylene/Poly(lactic acid) Blends: Evaluation of Structure–Properties Correlation for Reactive Processing
by: Jacek Andrzejewski, et al.
Published: (2020-02-01)

Development of Polyoxymethylene Particles via the Solution-Dissolution Process and Application to the Powder Bed Fusion of Polymers
by: Maximilian A. Dechet, et al.
Published: (2020-03-01)

The Synergistic Effect of Acidic Properties and Channel Systems of Zeolites on the Synthesis of Polyoxymethylene Dimethyl Ethers from Dimethoxymethane and Trioxymethylene
by: Jianbing Wu, et al.
Published: (2019-08-01)

Auto-ignition of polyoxymethylene dimethyl ether 3 (PODE3) blended with diesel and gasoline via combustion under homogeneous charge compression ignition
by: Qinjie Lin, et al.
Published: (2021-09-01)

Low-Temperature Oxidation of Dimethyl Ether to Polyoxymethylene Dimethyl Ethers over CNT-Supported Rhenium Catalyst
by: Qingde Zhang, et al.
Published: (2016-03-01)

Mechanical characteristics of plastic base Ports and impact on flushing efficacy
by: Guiffant G, et al.
Published: (2017-01-01)

Finite element analysis of dynamic linear viscoelastic materials
by: Gotts, Anthony C.
Published: (2002)

Quasi-static Fracture Evolution with Cohesive Energy
by: Li, Yiqing
Published: (2016)

Phase-Field Fracture Modelling of Thin Monolithic and Laminated Glass Plates under Quasi-Static Bending
by: Jaroslav Schmidt, et al.
Published: (2020-11-01)

Plastic Deformation of Thin Plates Subjected to Quasi-Static and Dynamic Loadings
by: A. A.N. Aljawi
Published: (2004-12-01)

On Limiting Behavior of Contaminant Transport Models in Coupled Surface and Groundwater Flows
by: Vincent J. Ervin, et al.
Published: (2015-11-01)

Fatigue Fracture Properties and Morphology of Polyoxymethylene (POM) Plates Produced under Moderate Processing Conditions
by: M. Berer, et al.
Published: (2018-01-01)

Influence of a New Form of Bolted Connection on the Mechanical Behaviors of a PC Shear Wall
by: Shaofei Jiang, et al.
Published: (2018-08-01)

Quasi-Static Crushing and Energy Absorption Characteristics of Thin-Walled Cylinders with Geometric Discontinuities of Various Aspect Ratios
by: N. Baaskaran, et al.

Analysis of Void Growth and Coalescence in Porous Polymer Materials. Coalescence in Polymer Materials
by: S. A. Reffas, et al.
Published: (2013-06-01)

Analysis of Void Growth and Coalescence in Porous Polymer Materials. Coalescence in Polymer Materials
by: S. A. Reffas, et al.
Published: (2013-06-01)

Hierarchical H-MOR Zeolite Supported Vanadium Oxide for Dimethyl Ether Direct Oxidation
by: Wenfeng Wang, et al.
Published: (2019-07-01)

Nanofilled and/or toughened POM composites produced by water-mediated melt compounding: Structure and mechanical properties
Published: (2008-10-01)

Experimental Study of High-Strength Concrete-Steel Plate Composite Shear Walls
by: Dongqi Jiang, et al.
Published: (2019-07-01)

Quasi-static Multilayer Electrical Modeling of Human Limb for IBC
by: S. H. Pun, et al.
Published: (2011-06-01)

Experimental Investigation Using Acoustic Emission Technique for Quasi-Static Cracks in Steel Pipes Assessment
by: Mohamed Shehadeh, et al.
Published: (2021-03-01)

Crystalline Characteristics, Mechanical Properties, Thermal Degradation Kinetics and Hydration Behavior of Biodegradable Fibers Melt-Spun from Polyoxymethylene/Poly(<span style="font-variant: small-caps">l</span>-lactic acid) Blends
by: Jianhua Li, et al.
Published: (2019-10-01)