Design and analysis of disc brake system in high speed vehicles

• Main Authors: Seelam Anil Babu, Hussain Nabil Ahmed Zakir, Hassan Krishanmurthy Sachidananda
• Format: Article
• Language: English
• Published: EDP Sciences 2021-01-01
• Series: International Journal for Simulation and Multidisciplinary Design Optimization
• Subjects: disc brake system; high speed; static analysis; thermal analysis; deformation
• Online Access: https://www.ijsmdo.org/articles/smdo/full_html/2021/01/smdo210060/smdo210060.html

Brakes are the most important component of any automobile. Brakes provide the ability to reduce or bring automobile to a complete stop. The process of braking is usually achieved by applying pressure to the brake discs. The main objective of this research paper is to propose an appropriate design and to perform analysis of a suitable brake rotor to enhance the performance of the high-speed car. The design of the brake disc is modelled using Solid works and the analysis is carried out using Ansys software. The analysis has been conducted by considering stainless steel and grey cast iron using same brake rotor design so that optimal choice of brake disc can be considered. The analysis considered involves static structural analysis and steady state thermal analysis considering specific parameters on brake rotor to increase the life of brake rotor. From the analysis it is found that the performance and life of disc brake depends upon heat dissipation. From the analysis results it can be concluded that grey cast iron has performed better as compared to stainless steel as this material has anti-fade properties which improves the life of the brake rotor.