Dynamic Response Analysis for NW Planetary Gear Transmission Used in Electric Wheel Hub
Taking the NW planetary gear transmission of an electric wheel hub as the research object, the mesh model was developed to calculate the mesh parameters using Masta. Then the lump parameter method was used to establish the dynamic model of the NW planetary transmission system considering the time-va...
Main Authors: | Zhuxiang Ou, Chaosheng Song, Caichao Zhu, Xingyu Yang |
---|---|
Format: | Article |
Language: | English |
Published: |
IEEE
2019-01-01
|
Series: | IEEE Access |
Subjects: | |
Online Access: | https://ieeexplore.ieee.org/document/8777123/ |
Similar Items
-
Some Issues Concerning Gear Wheels Fabrication by Sintering
by: Alexandru OLEVSCHI
Published: (2006-11-01) -
On the Design of In-Wheel-Hub Motor Transmission Systems with Six-Link Mechanisms for Electric Vehicles
by: Ngoc-Tan Hoang, et al.
Published: (2018-10-01) -
Planetary Mill with Friction Wheels Transmission Aided by an Additional Degree of Freedom
by: Italo Leite de Camargo, et al.
Published: (2019-05-01) -
DEFINITION OF THE GEAR’S GEOMETRY IN THE PLANETARY CYCLOIDAL TRANSMISSION
by: Sławomir BEDNARCZYK
Published: (2014-03-01) -
Model-Based Slippage Estimation to Enhance Planetary Rover Localization with Wheel Odometry
by: Anna Maria Gargiulo, et al.
Published: (2021-06-01)