Solution Synthesis of Co-Ni-W-Based ODS Alloy Powder

Solution Synthesis of Co-Ni-W-Based ODS Alloy Powder

Low-temperature combustion synthesis was utilized to prepare Co-Ni-W-based oxide dispersion strengthened (ODS) alloy powder. The influence of the U/Co and C/Co ratios on the morphology and specific surface area of the combusted powder was investigated. Particle size, phase constituents, and element...

Full description

Bibliographic Details
Main Authors:	Lin Zhang, Ye Liu, Xiaowei Chen, Yan Chen, Shengxi Wang, Mingli Qin, Xuanhui Qu
Format:	Article
Language:	English
Published:	MDPI AG 2019-04-01
Series:	Materials
Subjects:	Co-Ni-W-based powder low-temperature combustion synthesis oxide dispersion strengthening particle size
Online Access:	https://www.mdpi.com/1996-1944/12/8/1231

Similar Items

Effect of initial powder particle size on the hot workability of powder metallurgy Ni-based superalloys
by: Masaya Higashi, et al.
Published: (2020-09-01)

Research on the novel Al–W alloy powder with high volumetric combustion enthalpy
by: Aobo Hu, et al.
Published: (2021-07-01)

Production of Oxide Dispersion Strengthened Mg-Zn-Y Alloy by Equal Channel Angular Pressing of Mechanically Alloyed Powder
by: Keng-Liang Ou, et al.
Published: (2020-05-01)

Effect of the Particle Size of Al/Ni Multilayer Powder on the Exothermic Characterization
by: Shugo Miyake, et al.
Published: (2020-10-01)

Thermal stability and influence of Y2O3 dispersoids on the heat treatment response of an additively manufactured ODS Ni–Cr–Al–Ti γ/γ′ superalloy
by: Anthony De Luca, et al.
Published: (2021-11-01)

Microstructure Investigation of 13Cr-2Mo ODS Steel Components Obtained by High Voltage Electric Discharge Compaction Technique
by: Igor Bogachev, et al.
Published: (2015-11-01)

Microstructure Evolution of Ni-Based ODS Superalloy Powders During Horizontal Rotary Ball Milling
by: Lee H.-E., et al.
Published: (2017-06-01)

Sintered materials based on copper and alumina powders synthesized by a novel method
by: Korać Marija, et al.
Published: (2010-01-01)

Significance of powder breakdown during in-plant transport at industrial milk powder plants
by: Boiarkina, I, et al.
Published: (2015)

Microstructural Investigation of Ni and Ti Powders by Using Mechanical Alloying Method on NiTi Shape Memory Alloy Powders
by: Sinan AKSÖZ, et al.
Published: (2017-01-01)

Electrochemical deposition and characterization of Ni-Mo alloy powders
by: M.G. Pavlović, et al.
Published: (2007-12-01)

Microstructure and mechanical properties of hot rolled ODS copper
by: A. Muñoz, et al.
Published: (2020-08-01)

The Microstructure Properties of Ni-W Alloy Electrodeposition
by: Mofeed A. Jaleel, et al.
Published: (2018-02-01)

INFLUENCE OF MECHANICAL ALLOYING ATMOSPHERES ON THE MICROSTRUCTURES AND MECHANICAL PROPERTIES OF 15Cr ODS STEELS
by: SANGHOON NOH, et al.
Published: (2014-12-01)

Intermetalinio junginio susidarymas sistemoje Ni-W
by: Michailovskaja, Ilona
Published: (2008)

Corrosion Resistance of Heat-Treated Ni-W Alloy Coatings
by: Magdalena Popczyk, et al.
Published: (2020-03-01)

Strength anisotropy of rolled 11Cr-ODS steel
by: Takashi Tanno, et al.
Published: (2016-12-01)

Correlation between physical properties and flowability Indicators for fine powders
by: Bodhmage, Abhaykumar Krishnarao
Published: (2006)

Energy requirements to produce fine powders of raw and torrefied wood at pilot scale, and characterization of their flowability
by: Chatroux, A., et al.
Published: (2021)

Carbide Nanoparticle Dispersion Techniques for Metal Powder Metallurgy
by: Bahrum Prang Rocky, et al.
Published: (2021-05-01)

Fabrication and characterization of Cu reinforced with Y-enriched particles following a novel powder metallurgy route
by: A. Muñoz, et al.
Published: (2021-12-01)

INFLUENCE OF SHAPE AND SIZE OF PARTICLES ON THE OSSEOINTEGRATION OF POROUS IMPLANTS MADE OF TITANIUM POWDER
by: M. V. Tumilovich, et al.
Published: (2019-06-01)

Soudage par résistance du gainage combustible ODS d'un réacteur nucléaire de 4ème génération
by: Corpace, Fabien
Published: (2011)

In-situ alloyed, oxide-dispersion-strengthened CoCrFeMnNi high entropy alloy fabricated via laser powder bed fusion
by: Peng Chen, et al.
Published: (2020-09-01)

An in situ Study of NiTi Powder Sintering Using Neutron Diffraction
by: Gang Chen, et al.
Published: (2015-04-01)

Microstructure on remelting interface of Ni–W heterogeneous seed in preparing Ni-based single crystal superalloys
by: Jiarun Qin, et al.
Published: (2021-05-01)

Mechanical Properties, Thermal Stability and Microstructures of W-Re-ZrC Alloys Fabricated by Spark Plasma Sintering
by: Shu Miao, et al.
Published: (2020-02-01)

Lattice Strain Evolutions in Ni-W Alloys during a Tensile Test Combined with Synchrotron X-ray Diffraction
by: Tarik Sadat, et al.
Published: (2020-09-01)

Structure and mechanical properties of powders obtained by electrodisperging cobalt-chromium alloy
by: Ageev Evgeny, et al.
Published: (2021-01-01)

The Influence of Particle Shape, Powder Flowability, and Powder Layer Density on Part Density in Laser Powder Bed Fusion
by: Lukas Haferkamp, et al.
Published: (2021-03-01)

THE STRUCTURE AND PROPERTIES OF COMPOSITE LASER CLAD COATINGS WITH Ni BASED MATRIX WITH WC PARTICLES
by: Zita Iždinská, et al.
Published: (2010-09-01)

Effects of Annealing on Microstructure and Mechanical Properties of Metastable Powder Metallurgy CoCrFeNiMo<sub>0.2</sub> High Entropy Alloy
by: Cui Zhang, et al.
Published: (2019-04-01)

Core-Shell-Structured Particle Reinforced A356 Matrix Composite Prepared by Powder-Thixoforming: Effect of Reheating Temperature
by: Tijun Chen, et al.
Published: (2018-09-01)

Structural Evolution of Nano-sized Oxide Particles Formed in Mechanically Alloyed Fe-10Cr-5Y<sub>2</sub>O<sub>3</sub> Powders
by: Ga Eon Kim, et al.
Published: (2020-02-01)

The effect of structural changes during sintering on the electric and magnetic traits of the Ni96.7Mo3.3 alloy nanostructured powder
by: Ribić-Zelenović L., et al.
Published: (2009-01-01)

Compressibility and solid-state sintering behavior of W-Cu composite powders
by: Ardestani Mohammad, et al.
Published: (2015-05-01)

Principles of Dispersing Powders for 3D Printing
by: Hongli Zhou, et al.
Published: (2021-04-01)

Radio frequency thermal plasma-processed Ni-W nanostructures for printable microcircuit electrodes
by: Hyunwoong Na, et al.
Published: (2020-06-01)

Comparative Study of Tribological Behavior of Electroless Ni–B, Ni–B–Mo, and Ni–B–W Coatings at Room and High Temperatures
by: Arkadeb Mukhopadhyay, et al.
Published: (2018-08-01)

Microstructural stability of ODS Fe–14Cr (–2W–0.3Ti) steels after simultaneous triple irradiation
by: M. Šćepanović, et al.
Published: (2016-12-01)