HARDENING MONITORING AND CONTACT STRESS ANALYSIS OF TEST SAMPLES
The presented paper deals with the solution of rolling contact problem. A virtual model was created in Abaqus FEA software. The boundary conditions and contact forces were subsequently added. The results obtained after the simulation were compared with data obtained by experimental measurements,...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Silesian University of Technology
2014-09-01
|
| Series: | Scientific Journal of Silesian University of Technology. Series Transport |
| Subjects: | |
| Online Access: | http://www.polsl.pl/Wydzialy/RT/ZN_T/pelne_teksty/z84/131_ZN84_2014_ZmindaPastorekFalatSapieta.pdf |
| Summary: | The presented paper deals with the solution of rolling contact problem.
A virtual model was created in Abaqus FEA software. The boundary conditions and contact
forces were subsequently added. The results obtained after the simulation were compared with
data obtained by experimental measurements, which were performed on the test stand ELSPO
used in theoretical and technological center for plastometer construction materials for
experimental analyzes and tests in terms of rolling contact of solids. The FEM simulation and
experiment observed the size of the contact pressure, plastic deformation and the width of the
track, which was the site of contact. |
|---|---|
| ISSN: | 0209-3324 2450-1549 |