Shrinkage Simulation of Holographic Grating Using Diffusion Model in PQ-PMMA Photopolymer
An extended model based on nonlocal polymerization-driven diffusion model is derived by introducing shrinkage process for describing photopolymerized dynamics in PQ-PMMA photopolymer. The kinetic parameters, polymerization rate and diffusion rate are experimentally determined to provide quantitative...
Main Authors: | , , , , , , |
---|---|
Format: | Article |
Language: | English |
Published: |
EDP Sciences
2015-01-01
|
Series: | MATEC Web of Conferences |
Subjects: | |
Online Access: | http://dx.doi.org/10.1051/matecconf/20152502010 |
id |
doaj-975158eb9e1d410c8238297b5d6a6f0d |
---|---|
record_format |
Article |
spelling |
doaj-975158eb9e1d410c8238297b5d6a6f0d2021-02-02T07:20:52ZengEDP SciencesMATEC Web of Conferences2261-236X2015-01-01250201010.1051/matecconf/20152502010matecconf_emme2015_02010Shrinkage Simulation of Holographic Grating Using Diffusion Model in PQ-PMMA PhotopolymerWei Zepeng0Yu Dan1Li Xiaolan2Wang Yanwen3Chen Zhuang4Geng Yaohui5Lv Jiang6China College of Sciences, Tianjin University of TechnologyChina College of Sciences, Tianjin University of TechnologyChina College of Sciences, Tianjin University of TechnologyChina College of Sciences, Tianjin University of TechnologyChina College of Sciences, Tianjin University of TechnologyChina College of Sciences, Tianjin University of TechnologyChina College of Sciences, Tianjin University of TechnologyAn extended model based on nonlocal polymerization-driven diffusion model is derived by introducing shrinkage process for describing photopolymerized dynamics in PQ-PMMA photopolymer. The kinetic parameters, polymerization rate and diffusion rate are experimentally determined to provide quantitative simulation. The numerical results show that the fringes at edge of grating are firstly shifted and consequently, it leads to a contrast reduction of holograms. Finally, theoretical results are experimentally checked by temporal evolution of diffraction efficiency, and the shrinkage coefficient 0.5% is approximately achieved under incident intensity 25.3mw/cm2. This work can enhance the applicability of diffusion model and contribute to the reasonable description of the grating formation in the photopolymer.http://dx.doi.org/10.1051/matecconf/20152502010photopolymerholographic gratingdiffusion modelshrinkage |
collection |
DOAJ |
language |
English |
format |
Article |
sources |
DOAJ |
author |
Wei Zepeng Yu Dan Li Xiaolan Wang Yanwen Chen Zhuang Geng Yaohui Lv Jiang |
spellingShingle |
Wei Zepeng Yu Dan Li Xiaolan Wang Yanwen Chen Zhuang Geng Yaohui Lv Jiang Shrinkage Simulation of Holographic Grating Using Diffusion Model in PQ-PMMA Photopolymer MATEC Web of Conferences photopolymer holographic grating diffusion model shrinkage |
author_facet |
Wei Zepeng Yu Dan Li Xiaolan Wang Yanwen Chen Zhuang Geng Yaohui Lv Jiang |
author_sort |
Wei Zepeng |
title |
Shrinkage Simulation of Holographic Grating Using Diffusion Model in PQ-PMMA Photopolymer |
title_short |
Shrinkage Simulation of Holographic Grating Using Diffusion Model in PQ-PMMA Photopolymer |
title_full |
Shrinkage Simulation of Holographic Grating Using Diffusion Model in PQ-PMMA Photopolymer |
title_fullStr |
Shrinkage Simulation of Holographic Grating Using Diffusion Model in PQ-PMMA Photopolymer |
title_full_unstemmed |
Shrinkage Simulation of Holographic Grating Using Diffusion Model in PQ-PMMA Photopolymer |
title_sort |
shrinkage simulation of holographic grating using diffusion model in pq-pmma photopolymer |
publisher |
EDP Sciences |
series |
MATEC Web of Conferences |
issn |
2261-236X |
publishDate |
2015-01-01 |
description |
An extended model based on nonlocal polymerization-driven diffusion model is derived by introducing shrinkage process for describing photopolymerized dynamics in PQ-PMMA photopolymer. The kinetic parameters, polymerization rate and diffusion rate are experimentally determined to provide quantitative simulation. The numerical results show that the fringes at edge of grating are firstly shifted and consequently, it leads to a contrast reduction of holograms. Finally, theoretical results are experimentally checked by temporal evolution of diffraction efficiency, and the shrinkage coefficient 0.5% is approximately achieved under incident intensity 25.3mw/cm2. This work can enhance the applicability of diffusion model and contribute to the reasonable description of the grating formation in the photopolymer. |
topic |
photopolymer holographic grating diffusion model shrinkage |
url |
http://dx.doi.org/10.1051/matecconf/20152502010 |
work_keys_str_mv |
AT weizepeng shrinkagesimulationofholographicgratingusingdiffusionmodelinpqpmmaphotopolymer AT yudan shrinkagesimulationofholographicgratingusingdiffusionmodelinpqpmmaphotopolymer AT lixiaolan shrinkagesimulationofholographicgratingusingdiffusionmodelinpqpmmaphotopolymer AT wangyanwen shrinkagesimulationofholographicgratingusingdiffusionmodelinpqpmmaphotopolymer AT chenzhuang shrinkagesimulationofholographicgratingusingdiffusionmodelinpqpmmaphotopolymer AT gengyaohui shrinkagesimulationofholographicgratingusingdiffusionmodelinpqpmmaphotopolymer AT lvjiang shrinkagesimulationofholographicgratingusingdiffusionmodelinpqpmmaphotopolymer |
_version_ |
1724299685018992640 |