Model-Predictive-Control-Based Time-Optimal Trajectory Planning of the Distributed Actuation Mechanism Augmented by the Maximum Performance Evaluation
Trajectory planning for a redundant manipulator is a classic problem. However, because it is difficult to precisely evaluate its maximum performance, an optimization method has been typically used. In this study, a novel time-optimal trajectory planning method for a redundant manipulator is proposed...
Main Authors: | , , |
---|---|
Format: | Article |
Language: | English |
Published: |
MDPI AG
2021-08-01
|
Series: | Applied Sciences |
Subjects: | |
Online Access: | https://www.mdpi.com/2076-3417/11/16/7513 |
id |
doaj-937bcc975cb7442e812310edc821cc43 |
---|---|
record_format |
Article |
spelling |
doaj-937bcc975cb7442e812310edc821cc432021-08-26T13:30:19ZengMDPI AGApplied Sciences2076-34172021-08-01117513751310.3390/app11167513Model-Predictive-Control-Based Time-Optimal Trajectory Planning of the Distributed Actuation Mechanism Augmented by the Maximum Performance EvaluationJong Ho Kim0Kyunghwan Choi1In Gwun Jang2Cho Chun Shik Graduate School of Green Transportation, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34051, KoreaCenter for Eco-Friendly & Smart Vehicles, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, KoreaCho Chun Shik Graduate School of Green Transportation, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34051, KoreaTrajectory planning for a redundant manipulator is a classic problem. However, because it is difficult to precisely evaluate its maximum performance, an optimization method has been typically used. In this study, a novel time-optimal trajectory planning method for a redundant manipulator is proposed using the model predictive control (MPC) augmented by the maximum performance evaluation (MPE). First, the optimization formulation is expressed to evaluate the maximum performance of the distributed-actuation-mechanism-based three-revolute-joint manipulator (DAM-3R), which has a high level of redundancy, and the joint-actuation-mechanism-based three-revolute-joint manipulator (JAM-3R) for comparison. The optimization is conducted by linking the multibody dynamics analysis module and the optimization module. For time-optimal trajectory planning, the MPC problem is then formulated using mathematical performance models for the DAM-3R and JAM-3R based on the MPE results, which are considered as the upper bound of the manipulator performance at each end-effector position. To verify the proposed method, a point-to-point task with no predefined path is investigated. The simulation results show that the working time of the DAM-3R is 19.1% less than that of the JAM-3R. Moreover, the energy consumption for the DAM-3R is 45.0% lower than that for the JAM-3R by optimally utilizing the higher redundancy of the DAM-3R. Thus, it can be concluded that the proposed method is effective for time-optimal trajectory planning for redundant manipulators.https://www.mdpi.com/2076-3417/11/16/7513time-optimal trajectory planningdistributed actuation mechanismmaximum performance evaluationmodel predictive control |
collection |
DOAJ |
language |
English |
format |
Article |
sources |
DOAJ |
author |
Jong Ho Kim Kyunghwan Choi In Gwun Jang |
spellingShingle |
Jong Ho Kim Kyunghwan Choi In Gwun Jang Model-Predictive-Control-Based Time-Optimal Trajectory Planning of the Distributed Actuation Mechanism Augmented by the Maximum Performance Evaluation Applied Sciences time-optimal trajectory planning distributed actuation mechanism maximum performance evaluation model predictive control |
author_facet |
Jong Ho Kim Kyunghwan Choi In Gwun Jang |
author_sort |
Jong Ho Kim |
title |
Model-Predictive-Control-Based Time-Optimal Trajectory Planning of the Distributed Actuation Mechanism Augmented by the Maximum Performance Evaluation |
title_short |
Model-Predictive-Control-Based Time-Optimal Trajectory Planning of the Distributed Actuation Mechanism Augmented by the Maximum Performance Evaluation |
title_full |
Model-Predictive-Control-Based Time-Optimal Trajectory Planning of the Distributed Actuation Mechanism Augmented by the Maximum Performance Evaluation |
title_fullStr |
Model-Predictive-Control-Based Time-Optimal Trajectory Planning of the Distributed Actuation Mechanism Augmented by the Maximum Performance Evaluation |
title_full_unstemmed |
Model-Predictive-Control-Based Time-Optimal Trajectory Planning of the Distributed Actuation Mechanism Augmented by the Maximum Performance Evaluation |
title_sort |
model-predictive-control-based time-optimal trajectory planning of the distributed actuation mechanism augmented by the maximum performance evaluation |
publisher |
MDPI AG |
series |
Applied Sciences |
issn |
2076-3417 |
publishDate |
2021-08-01 |
description |
Trajectory planning for a redundant manipulator is a classic problem. However, because it is difficult to precisely evaluate its maximum performance, an optimization method has been typically used. In this study, a novel time-optimal trajectory planning method for a redundant manipulator is proposed using the model predictive control (MPC) augmented by the maximum performance evaluation (MPE). First, the optimization formulation is expressed to evaluate the maximum performance of the distributed-actuation-mechanism-based three-revolute-joint manipulator (DAM-3R), which has a high level of redundancy, and the joint-actuation-mechanism-based three-revolute-joint manipulator (JAM-3R) for comparison. The optimization is conducted by linking the multibody dynamics analysis module and the optimization module. For time-optimal trajectory planning, the MPC problem is then formulated using mathematical performance models for the DAM-3R and JAM-3R based on the MPE results, which are considered as the upper bound of the manipulator performance at each end-effector position. To verify the proposed method, a point-to-point task with no predefined path is investigated. The simulation results show that the working time of the DAM-3R is 19.1% less than that of the JAM-3R. Moreover, the energy consumption for the DAM-3R is 45.0% lower than that for the JAM-3R by optimally utilizing the higher redundancy of the DAM-3R. Thus, it can be concluded that the proposed method is effective for time-optimal trajectory planning for redundant manipulators. |
topic |
time-optimal trajectory planning distributed actuation mechanism maximum performance evaluation model predictive control |
url |
https://www.mdpi.com/2076-3417/11/16/7513 |
work_keys_str_mv |
AT jonghokim modelpredictivecontrolbasedtimeoptimaltrajectoryplanningofthedistributedactuationmechanismaugmentedbythemaximumperformanceevaluation AT kyunghwanchoi modelpredictivecontrolbasedtimeoptimaltrajectoryplanningofthedistributedactuationmechanismaugmentedbythemaximumperformanceevaluation AT ingwunjang modelpredictivecontrolbasedtimeoptimaltrajectoryplanningofthedistributedactuationmechanismaugmentedbythemaximumperformanceevaluation |
_version_ |
1721195047929511936 |