Effects of Processing Parameters on Properties of SiCp/Al Composites

Effects of Processing Parameters on Properties of SiCp/Al Composites

The effects of hot pressing and hot extrusion temperatures on the properties of 12%SiCp/6066Al (volume fraction) composites fabricated by powder metallurgy have been studied. The experimental results indicate that the hot extrusion, an essential stage of powder metallurgy to produce this sort of par...

Full description

Bibliographic Details
Main Authors:	Hui Qun, Shao Dong Yuan, Li Chun Mei, Chen Jing Jing, Li Xiao, Cheng Nan Pu
Format:	Article
Language:	English
Published:	EDP Sciences 2016-01-01
Series:	MATEC Web of Conferences
Online Access:	http://dx.doi.org/10.1051/matecconf/20166706016

Similar Items

Preparation and Anodizing of SiCp/Al Composites with Relatively High Fraction of SiCp
by: Bin Wang, et al.
Published: (2018-01-01)

Effects of Ti-coating layer on the distribution of SiCP in the SiCP/2014Al composites
by: Delong Yang, et al.
Published: (2015-12-01)

Modeling and optimization of cutting forces and effect of turning parameters on SiCp/Al 45% vs SiCp/Al 50% metal matrix composites: a comparative study
by: Rashid Ali Laghari, et al.
Published: (2021-06-01)

Processing and properties of Al–Li–SiCp composites
by: Ranjit Bauri et al
Published: (2007-01-01)

The Abrasive Wear of SiCp/6061Al Composite
by: Tsai,Chao Chia, et al.
Published: (1993)

Microstructure-based modeling of the dynamic mechanical properties of SiCp/Al composites
by: Yuan Mei Ni, et al.
Published: (2016-07-01)

Behaviors of Oxide Film during Semisolid Brazing of SiCp/6063Al Composite Materials
by: Jing Xiao, et al.
Published: (2018-01-01)

Preparation technique of SiCp reinforced Al matrix composite
by: HAO Bin, et al.
Published: (2006-05-01)

Al/SiCp Composites Behavior During Thermomechanical Processing
by: Severin, Irina, et al.
Published: (1997-06-01)

The Fabrication of SiCp/Al Composites by Squeeze Infiltration Casting
by: Hwu, Boq Kang, et al.
Published: (1994)

Study on Vibration Tapping for SiCp/Al Particle-reinforced Metal Matrix Composite
by: Liu Yang, et al.
Published: (2018-01-01)

Microstructure Evolution in 6063 / SiCp Composites
by: Severin, Irina, et al.
Published: (1998-12-01)

Influence of Metallurgical Parameters and Process Parameters on the Fluidity of Al/SiCp Composites by Horizontal Squeeze Casting
by: Wei-Feng Yen, et al.
Published: (2002)

Effect of consolidation parameters and heat treatment on microstructures and mechanical properties of SiCp/2024 Al composites
by: Hao Shiming, et al.
Published: (2015-11-01)

Effect of Solid Solution and Ageing Treatments on the Microstructure and Mechanical Properties of the SiCp/Al-Si-Cu-Mg Composite
by: Ai-Qin Wang, et al.
Published: (2017-07-01)

Rotary ultrasonic machining of SiCp/Al composites: An experimental study on cutting force and machinability
by: Ming Wang, et al.
Published: (2019-12-01)

Hot deformation behaviour of SiCp/Al composites and their matrices and an Al-Mg-Si alloy
by: Sakaris, Peter
Published: (1993)

Effects of Turning Parameters and Parametric Optimization of the Cutting Forces in Machining SiCp/Al 45 wt% Composite
by: Rashid Ali Laghari, et al.
Published: (2020-06-01)

Development of High-Performance SiCp/Al-Si Composites by Equal Channel Angular Pressing
by: Qiong Xu, et al.
Published: (2018-09-01)

Aspectos básicos de la fabricación de materiales compuestos Al/SiCp y Al-Si/SiCp para electrónica y automoción
by: Molina Jordá, José Miguel
Published: (2009)

Nano-SiCp/Al2014 composites with high strength and good ductility
by: Zhang Long-Jiang, et al.
Published: (2017-05-01)

The superior ductility of fine SiCp/Al2014 composites after extrusion
by: Zhang Long-Jiang, et al.
Published: (2017-03-01)

Characterization Of Indigenous Al-Zn-Mg/SiCp Metal Matrix Composites
by: Ravi Kumar, N V
Published: (2013)

Bonding SiCp/Al Composites via Laser-Induced Exothermic Reactions
by: Yifeng Wang, et al.
Published: (2021-05-01)

2D and 3D milled surface roughness of high volume fraction SiCp/Al composites
by: Tao Wang, et al.
Published: (2015-06-01)

Study Of The Properties And Particle/Matrix Interface In Al-12 Si-10% SiCp Composite
by: Sundararajan, S
Published: (2011)

The effect of Sol-Gel technique on the aluminium-SiCp composite
by: Idris, Jamaliah, et al.
Published: (2005)

A Study on the Machinability of A356/SiCp Composites
by: ping-chien tsai, et al.
Published: (2004)

The study on surface integrity on laser-assisted turning of SiCp/2024Al
by: Changtai Zhai, et al.
Published: (2020-01-01)

Taguchi’s method of optimization of fracture toughness parameters of Al-SiCp composite using compact tension specimens
by: Hareesha Guddhur, et al.
Published: (2021-04-01)

Influence of Stirring Speed on Microstructure and Wear Morphology of SiCp-6061Al Composite
by: Adetayo Abdulmumin Adebisi, et al.
Published: (2016-09-01)

SiCp/Al Composites Fabricated by Electroless Plating and Vacuum Suctiion Infiltration Processes
by: Chung, Wen-Sheng, et al.
Published: (1997)

A Study on the Powder Metallurgy Processing and Properties of SiCp/7075 Al Composites
by: Sheu, Chai-Yuuan, et al.
Published: (1996)

A Research on the Fluidity of Al/SiCp Composite by CO2 Sand Casting
by: J. Y. Chai, et al.
Published: (2001)

Experimental and Simulation Research on the Influence of Stirring Parameters on the Distribution of Particles in Cast SiCp/A356 Composites
by: Zhiyong Yang, et al.
Published: (2017-01-01)

Processing of AZ91D/SiCp magnesium matrix composite
by: CHIH-YI CHEN, et al.
Published: (2005)

The Fabrication of Cu/SiCp Composite by Method of Powder Sintering and Extrusion
by: TSAY, YI-SHIUN, et al.
Published: (1997)

Effect of the Different High Volume Fraction of SiC Particles on the Junction of Bismuthate Glass-SiCp/Al Composite
by: Bin Wang, et al.
Published: (2018-01-01)

The Microstructure and Thermal Conductivity of Pressureless Infiltrated SiCp/Al Composites Containing Electroless Nickel Platings
by: Aihua Zou, et al.
Published: (2015-01-01)

Application of Modern and Classical Optimization Techniques in Abrasion of Al-Cu-SiCp and Al-Cu-B4Cp Composites
by: Ahmet SAHİNER, et al.
Published: (2018-08-01)