Characteristics of Al-Si Alloys with High Melting Point Elements for High Pressure Die Casting

Characteristics of Al-Si Alloys with High Melting Point Elements for High Pressure Die Casting

This paper is devoted to the possibility of increasing the mechanical properties (tensile strength, yield strength, elongation and hardness) of high pressure die casting (HPDC) hypoeutectic Al-Si alloys by high melting point elements: chromium, molybdenum, vanadium and tungsten. EN AC-46000 alloy wa...

Full description

Bibliographic Details
Main Authors:	Tomasz Szymczak, Grzegorz Gumienny, Leszek Klimek, Marcin Goły, Jan Szymszal, Tadeusz Pacyniak
Format:	Article
Language:	English
Published:	MDPI AG 2020-10-01
Series:	Materials
Subjects:	crystallization microstructure mechanical properties thermal and derivative analysis
Online Access:	https://www.mdpi.com/1996-1944/13/21/4861

Similar Items

Microstructural Characteristics of AlSi9Cu3(Fe) Alloy with High Melting Point Elements
by: Tomasz Szymczak, et al.
Published: (2020-09-01)

Hypoeutectic Al-Si Alloy Doped with Chromium, Tungsten and Molybdenum Designated for Pressure Die Casting
by: Szymczak T., et al.
Published: (2017-09-01)

Hypoeutectic Silumin to Pressure Die Casting with Vanadium and Tungsten
by: Szymczak T., et al.
Published: (2016-12-01)

Effect of Mg addition on the crystallization kinetics of Zn-Al-Cu alloys
by: Krupiński M., et al.
Published: (2020-01-01)

Bifilm Inclusions in High Alloyed Cast Iron
by: Marcin Stawarz, et al.
Published: (2021-06-01)

Effect of Melt Overheating on Structure and Mechanical Properties of Al-Mg-Si Cast Alloy
by: Vladislav Deev, et al.
Published: (2021-08-01)

On the characterization of microstructure and fracture in a high-pressure die-casting Al-10 wt%Si alloy
by: Xiangyi Jiao, et al.
Published: (2020-04-01)

Microstructure and Mechanical Properties of High Vacuum Die-Cast AlSiMgMn Alloys at as-Cast and T6-Treated Conditions
by: Fei Liu, et al.
Published: (2019-06-01)

VISCOSITY END ELECTRICAL CONDUCTIVITY OF LIQUID HYPEREUTECTIC ALLOYS Al-Si
by: Оlga А. Chikova, et al.
Published: (2016-09-01)

Effects of process parameters on morphology and distribution of externally solidified crystals in microstructure of magnesium alloy die castings
by: Meng-wu Wu, et al.
Published: (2018-03-01)

Effect of intensive cooling of alloy AM60 with chromium and vanadium additions on cast microstructure and mechanical properties
by: Rapiejko C., et al.
Published: (2017-03-01)

Primary Crystals of AlfeMnSi Intermetallics in the Cast AlSi Alloys
by: Warmuzek M.
Published: (2017-09-01)

Effect of Intensive Cooling of Alloy AZ91 with a Chromium Addition on the Microstructure and Mechanical Properties of the Casting
by: Rapiejko C., et al.
Published: (2017-12-01)

Carbidic Bainitic and Ausferritic Ductile Cast Iron
by: Gumienny G.
Published: (2013-12-01)

Modification of Al-Si-Cu cast alloy
by: Farkašová Mária, et al.
Published: (2013-01-01)

Evaluation of Corrosion Behavior on Crept AlSi10MnMg (AA365) Alloy Produced by High-Pressure Die-Casting (HPDC)
by: Seonghwan Park, et al.
Published: (2021-07-01)

The Effect of Water Mist Cooling of Casting Die on the Solidification, Microstructure and Properties of AlSi20 Alloy
by: Władysiak R., et al.
Published: (2017-03-01)

Effects of Si Content and Ca Addition on Thermal Conductivity of As-Cast Mg–Si Alloys
by: Xiong Zhou, et al.
Published: (2018-11-01)

Evaluation of Simultaneous Effect of Melt Filtration and Cooling Rate on Tensile Properties of A356 Cast Alloy
by: A. Khakzadshahandashti, et al.
Published: (2019-09-01)

The Influence of Returnable Material on Internal Homogeneity of the High-Pressure Die-Cast AlSi9Cu3(Fe) Alloy
by: Marek Matejka, et al.
Published: (2021-07-01)

Corrosion Resistance of High-Alloyed White Cast Iron
by: Kawalec M., et al.
Published: (2015-04-01)

Comparative study on wear behavior of as cast and spray cast hypereutectic Al-Si alloy
by: Goudar Dayanand M., et al.
Published: (2018-08-01)

Modeling studies on divorced eutectic formation of high pressure die cast magnesium alloy
by: Meng-wu Wu, et al.
Published: (2018-01-01)

Changes in Abrasive Wear Resistance during Miller Test of High-Manganese Cast Steel with Niobium Carbides Formed in the Alloy Matrix
by: Grzegorz Tęcza
Published: (2021-05-01)

Effect of Co addition on crystallization and magnetic properties of FeSiBPCu alloy
by: Rui Xiang, et al.
Published: (2014-12-01)

Crystallization and structure of cast A390.0 alloy with melt overheating temperature
by: J. Piątkowski, et al.
Published: (2012-07-01)

Investigation of the Quench Sensitivity of an AlSi10Mg Alloy in Permanent Mold and High-Pressure Vacuum Die Castings
by: Mengyun Liu, et al.
Published: (2019-06-01)

MODIFYING OF SECONDARY ALLOYS
by: V. Yu. Stetsenko
Published: (2015-11-01)

Local Squeezing Casting Influence on the Compactness of AlSi10Mg Alloy Castings
by: Brodarac, Z., et al.
Published: (2007-01-01)

Effects of spherical quasi-crystal on microstructure and mechanical properties of ZA155 high zinc magnesium alloy
by: Zhang Jinshan, et al.
Published: (2010-05-01)

CHARACTERIZATION OF PHASES IN SECONDARY AlZn10Si8Mg CAST ALLOY
by: Eva Tillová, et al.
Published: (2011-04-01)

Effect of Alloying Elements on the Sr Modification of Al-Si Cast Alloys
by: Elisa Fracchia, et al.
Published: (2021-02-01)

Wear Characteristics of Recycled Cast Al-6Si-3Cu Alloys
by: F.M. Mwema, et al.
Published: (2019-12-01)

EFFECT OF LIQUID PHASE ON THE STRUCTURE FORMATION OF CAST ALLOY Al-11,7% Si
by: A. I. Anikin, et al.
Published: (2016-04-01)

Material properties of Al-Si-Cu aluminium alloy produced by the rotational cast technology
by: Muhammad Syahid, et al.
Published: (2017-03-01)

Effect Of Cr and V Alloy Additions on the Microstructure and Mechanical Properties of Am60 Magnesium Alloy
by: Rapiejko C., et al.
Published: (2014-06-01)

Effect of C Addition on as-Cast Microstructures of High Nb Containing TiAl Alloys
by: Jinhu Liu, et al.
Published: (2019-11-01)

High performing cast aluminium-silicon alloys
by: Riestra, Martin
Published: (2017)

Selective laser melting of prealloyed high alloy steel powder beds
by: Wright, Christopher S., et al.
Published: (2009)

Technological parameters of die casting and quality of casting from EN AC46500 alloy
by: Š. Gašpár, et al.
Published: (2016-07-01)

Cannot write session to /tmp/vufind_sessions/sess_p2n4jl6ha7qe9p2rp7csdi6f3o